[openmamba-users-it] Masterizzatore sata:
andrea sabba
a.sabba a gmail.com
Gio 6 Dic 2007 15:09:35 CET
ho provato solo con un cd-rw,
dvd avevo provato a cancellarlo per ulteriore verifica,
nessun risultato gira in eterno.
ecco il dmesg
(fatto con il masterizzatore inutilizzabile, dopo l'errore di k3b):
[root a acolazione ansax]# dmesg
Linux version 2.6.22mamba (silvan a tao) (gcc version 4.2.1) #1 SMP PREEMPT
Mon Nov 5 17:54:01 CET 2007
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000004fffc000 (usable)
BIOS-e820: 000000004fffc000 - 000000004ffff000 (ACPI data)
BIOS-e820: 000000004ffff000 - 0000000050000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
383MB HIGHMEM available.
896MB LOWMEM available.
Entering add_active_range(0, 0, 327676) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 229376
HighMem 229376 -> 327676
early_node_map[1] active PFN ranges
0: 0 -> 327676
On node 0 totalpages: 327676
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1760 pages used for memmap
Normal zone: 223520 pages, LIFO batch:31
HighMem zone: 767 pages used for memmap
HighMem zone: 97533 pages, LIFO batch:31
DMI 2.3 present.
ACPI: RSDP 000F62A0, 0014 (r0 ASUS )
ACPI: RSDT 4FFFC000, 0030 (r1 ASUS A7V600 42302E31 MSFT 31313031)
ACPI: FACP 4FFFC0B2, 0074 (r1 ASUS A7V600 42302E31 MSFT 31313031)
ACPI: DSDT 4FFFC126, 2C4F (r1 ASUS A7V600 1000 MSFT 100000B)
ACPI: FACS 4FFFF000, 0040
ACPI: BOOT 4FFFC030, 0028 (r1 ASUS A7V600 42302E31 MSFT 31313031)
ACPI: APIC 4FFFC058, 005A (r1 ASUS A7V600 42302E31 MSFT 31313031)
ACPI: PM-Timer IO Port: 0xe408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:10 APIC version 16
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 60000000 (gap: 50000000:aec00000)
Built 1 zonelists. Total pages: 325117
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.22mamba resume2=
root=/dev/hda2 video=vesafb:1024x768-32,ywrap,mtrr:3 quiet
splash=silent,fadein console=tty1
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 1905.504 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1293000k/1310704k available (2408k kernel code, 16408k reserved,
921k data, 340k init, 393200k highmem)
virtual kernel memory layout:
fixmap : 0xfff4f000 - 0xfffff000 ( 704 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc0448000 - 0xc049d000 ( 340 kB)
.data : 0xc035a208 - 0xc0440620 ( 921 kB)
.text : 0xc0100000 - 0xc035a208 (2408 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
SLUB: Genslabs=22, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
Calibrating delay using timer specific routine.. 3812.69 BogoMIPS
(lpj=1906348)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000
00000000 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420 00000000
00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 12k freed
ACPI: Core revision 20070126
CPU0: AMD Athlon(TM) XP 2600+ stepping 00
Total of 1 processors activated (3812.69 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Brought up 1 CPUs
NET: Registered protocol family 16
EISA bus registered
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xf1970, last bus=1
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: enabled onboard AC97/MC97 devices
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12) *15
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 16 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a
report
Time: tsc clocksource has been installed.
ACPI: RTC can wake from S4
pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved
pnp: 00:00: iomem range 0xf0000-0xfffff could not be reserved
pnp: 00:00: iomem range 0x100000-0x4fffffff could not be reserved
pnp: 00:00: iomem range 0xfec00000-0xfec000ff could not be reserved
pnp: 00:02: ioport range 0xe400-0xe47f has been reserved
pnp: 00:02: ioport range 0xe800-0xe81f has been reserved
pnp: 00:02: iomem range 0xfff80000-0xffffffff could not be reserved
pnp: 00:02: iomem range 0xffb80000-0xffbfffff has been reserved
pnp: 00:0f: ioport range 0x290-0x297 has been reserved
pnp: 00:0f: ioport range 0x370-0x375 has been reserved
PCI: Bridge: 0000:00:01.0
IO window: d000-dfff
MEM window: d7000000-d7ffffff
PREFETCH window: d8000000-efffffff
PCI: Setting latency timer of device 0000:00:01.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 1282k freed
Simple Boot Flag at 0x3a set to 0x1
Machine check exception polling timer started.
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
scx200: NatSemi SCx200 Driver
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Installing knfsd (copyright (C) 1996 okir a monad.swb.de).
io scheduler noop registered
io scheduler cfq registered (default)
PCI: VIA PCI bridge detected. Disabling DAC.
PCI: Bypassing VIA 8237 APIC De-Assert Message
Boot video device is 0000:01:00.0
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
vesafb: ATI Technologies Inc., V280, 01.00 (OEM: ATI RADEON 9200)
vesafb: VBE version: 2.0
vesafb: protected mode interface info at c000:577a
vesafb: pmi: set display start = c00c580e, set palette = c00c585a
vesafb: pmi: ports = d810 d816 d854 d838 d83c d85c d800 d804 d8b0 d8b2 d8b4
vesafb: no monitor limits have been set
vesafb: scrolling: ywrap using protected mode interface, yres_virtual=2560
vesafb: VBE state buffer size cannot be determined (eax: 0x0)
Switched to high resolution mode on CPU 0
Console: switching to colour frame buffer device 128x48
fbsplash: console 0 using theme 'default'
fbsplash: switched splash state to 'on' on console 0
vesafb: framebuffer at 0xe8000000, mapped to 0xf8880000, using 10240k, total
16384k
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: module loaded
v2.3 : Micro Memory(tm) PCI memory board block driver
MM: desc_per_page = 128
input: Macintosh mouse button emulation as /class/input/input0
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:0f.1
ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 16
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
ide0: BM-DMA at 0x9400-0x9407, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0x9408-0x940f, BIOS settings: hdc:pio, hdd:DMA
Probing IDE interface ide0...
hda: Maxtor 6Y080L0, ATA DISK drive
hdb: SS04 SAMSUNG DVD-ROM SD-612S, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdd: Maxtor 6Y160P0, ATA DISK drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=65535/16/63,
UDMA(133)
hda: cache flushes supported
hda: hda1 hda2 hda3 hda4
hdd: max request size: 512KiB
hdd: 320173056 sectors (163928 MB) w/7936KiB Cache, CHS=19929/255/63,
UDMA(133)
hdd: cache flushes supported
hdd: hdd1 hdd3 hdd4
usbcore: registered new interface driver libusual
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input1
EISA: Probing bus 0 at eisa.0
Cannot allocate resource for EISA slot 8
EISA: Detected 0 cards.
Advanced Linux Sound Architecture Driver Version 1.0.14 (Thu May 31 09:03:25
2007 UTC).
ALSA device list:
No soundcards found.
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 15
Using IPI No-Shortcut mode
Freeing unused kernel memory: 340k freed
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
input: ImExPS/2 Generic Explorer Mouse as /class/input/input2
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 17
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:10.0: irq 17, io base 0x00009000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 17
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:10.1: irq 17, io base 0x00008800
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc_cmos: probe of 00:05 failed with error -16
Linux agpgart interface v0.102 (c) Dave Jones
ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 17
uhci_hcd 0000:00:10.2: UHCI Host Controller
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:10.2: irq 17, io base 0x00008400
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
libata version 2.21 loaded.
ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 17
uhci_hcd 0000:00:10.3: UHCI Host Controller
uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:10.3: irq 17, io base 0x00008000
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
slamr: module license 'Smart Link Ltd.' taints kernel.
slamr: SmartLink AMRMO modem.
parport_pc 00:09: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 3
[PCSPP,TRISTATE,COMPAT,ECP,DMA]
agpgart: Detected VIA KT400/KT400A/KT600 chipset
usb 1-2: new full speed USB device using uhci_hcd and address 2
agpgart: AGP aperture is 128M @ 0xf0000000
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
PCI: Enabling device 0000:00:09.0 (0014 -> 0017)
ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 18 (level, low) -> IRQ 18
skge 1.11 addr 0xd6800000 irq 18 chip Yukon rev 1
skge eth0: addr 00:0c:6e:ab:ef:8b
sata_via 0000:00:0f.0: version 2.2
ACPI: PCI Interrupt 0000:00:0f.0[A] -> GSI 20 (level, low) -> IRQ 16
sata_via 0000:00:0f.0: routed to hard irq line 0
scsi0 : sata_via
scsi1 : sata_via
ata1: SATA max UDMA/133 cmd 0x0001b400 ctl 0x0001b002 bmdma 0x0001a000 irq
16
ata2: SATA max UDMA/133 cmd 0x0001a800 ctl 0x0001a402 bmdma 0x0001a008 irq
16
gameport: NS558 PnP Gameport is pnp00:0e/gameport0, io 0x200, speed 1065kHz
sk98lin: driver has been replaced by the skge driver and is scheduled for
removal
usb 1-2: configuration #1 chosen from 1 choice
Initializing USB Mass Storage driver...
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-7: Maxtor 7L250S0, BACE1G20, max UDMA/133
ata1.00: 490234752 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/133
usb 3-1: new full speed USB device using uhci_hcd and address 2
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
usb 3-1: configuration #1 chosen from 1 choice
ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-H62N, CL00, max UDMA/100
scsi2 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
scsi 2:0:0:0: Direct-Access IC USB Storage-CFC 322E PQ: 0 ANSI: 0
CCS
sd 2:0:0:0: [sda] Attached SCSI removable disk
scsi 2:0:0:1: Direct-Access IC USB Storage-SMC 322E PQ: 0 ANSI: 0
CCS
ata2.00: configured for UDMA/100
sd 2:0:0:1: [sdb] Attached SCSI removable disk
scsi 0:0:0:0: Direct-Access ATA Maxtor 7L250S0 BACE PQ: 0 ANSI: 5
sd 0:0:0:0: [sdc] 490234752 512-byte hardware sectors (251000 MB)
sd 0:0:0:0: [sdc] Write Protect is off
sd 0:0:0:0: [sdc] Mode Sense: 00 3a 00 00
scsi 2:0:0:2: Direct-Access IC USB Storage-MMC 322E PQ: 0 ANSI: 0
CCS
sd 0:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
sd 0:0:0:0: [sdc] 490234752 512-byte hardware sectors (251000 MB)
sd 0:0:0:0: [sdc] Write Protect is off
sd 0:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
sdc:<5>sd 2:0:0:2: [sdd] Attached SCSI removable disk
scsi 2:0:0:3: Direct-Access IC USB Storage-MSC 322E PQ: 0 ANSI: 0
CCS
sd 2:0:0:3: [sde] Attached SCSI removable disk
usb-storage: device scan complete
sdc1 sdc2 < sdc5 >
sd 0:0:0:0: [sdc] Attached SCSI disk
scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-H62N CL00 PQ: 0 ANSI: 5
slamr: probe 1106:3068 VIA3058 card...
PCI: Enabling device 0000:00:11.6 (0000 -> 0001)
ACPI: PCI Interrupt 0000:00:11.6[C] -> GSI 22 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:11.6 to 64
slamr: mc97 codec is ADS70
slamr: cannot init card.
ACPI: PCI interrupt for device 0000:00:11.6 disabled
ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 17
ehci_hcd 0000:00:10.4: EHCI Host Controller
ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
ehci_hcd 0000:00:10.4: irq 17, io mem 0xd5800000
ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 8 ports detected
OsDcpInit: cannot register chrdev (-16)
usb 3-1: USB disconnect, address 2
hsfengine: Unknown symbol cnxthsf_OsCriticalSectionAcquire
hsfengine: Unknown symbol cnxthsf_OsSleep
hsfengine: Unknown symbol cnxthsf_OsCriticalSectionDestroy
hsfengine: Unknown symbol cnxthsf_OsStrnCpy
hsfengine: Unknown symbol cnxthsf_OsDiagMgrClose
hsfengine: Unknown symbol cnxthsf_OsAtomicCompareAndSwapEx
hsfengine: Unknown symbol cnxthsf_OsMemDMAAllocate
hsfengine: Unknown symbol cnxthsf_OsGetCurrentThread
hsfengine: Unknown symbol cnxthsf_OsDiagMgrOpen
hsfengine: Unknown symbol cnxthsf_NVM_Close
hsfengine: Unknown symbol cnxthsf_OsDebugPrintf
hsfengine: Unknown symbol cnxthsf_OsLockTryUnlock
hsfengine: Unknown symbol cnxthsf_DcpCallback
hsfengine: Unknown symbol cnxthsf_OsStrCmp
hsfengine: Unknown symbol cnxthsf_DcpSetVolume
hsfengine: Unknown symbol cnxthsf_OsDestroyPeriodicTimer
hsfengine: Unknown symbol cnxthsf_OsDebugBreakpoint
hsfengine: Unknown symbol cnxthsf_NVM_Write
hsfengine: Unknown symbol cnxthsf_DcpDestroy
hsfengine: Unknown symbol cnxthsf_OsCriticalSectionRelease
hsfengine: Unknown symbol cnxthsf_OsAtomicAdd
hsfengine: Unknown symbol cnxthsf_OsIsDigit
hsfengine: Unknown symbol cnxthsf_OsAllocate
hsfengine: Unknown symbol cnxthsf_OsAtomicDecrement
hsfengine: Unknown symbol cnxthsf_OsMemDMAFree
hsfengine: Unknown symbol cnxthsf_OsSprintf
hsfengine: Unknown symbol cnxthsf_NVM_Open
hsfengine: Unknown symbol cnxthsf_OsToupper
hsfengine: Unknown symbol cnxthsf_OsErrorPrintf
hsfengine: Unknown symbol cnxthsf_OsMemSet
hsfengine: Unknown symbol cnxthsf_OsFloatSuffix
hsfengine: Unknown symbol cnxthsf_OsGetProcessorFreq
hsfengine: Unknown symbol cnxthsf_OsGetSystemTime
hsfengine: Unknown symbol cnxthsf_DcpCreate
hsfengine: Unknown symbol cnxthsf_OsSetPeriodicTimer
hsfengine: Unknown symbol cnxthsf_OsStrCpy
hsfengine: Unknown symbol cnxthsf_OsMemMove
hsfengine: Unknown symbol cnxthsf_OsLockTry
hsfengine: Unknown symbol cnxthsf_OsStrLen
hsfengine: Unknown symbol cnxthsf_OsFloatPrefix
hsfengine: Unknown symbol cnxthsf_OsFree
hsfengine: Unknown symbol cnxthsf_OsImmediateTimeOut
hsfengine: Unknown symbol cnxthsf_OsDiagMgrNotify
hsfengine: Unknown symbol cnxthsf_OsMemCpy
hsfengine: Unknown symbol cnxthsf_OsLockCreate
hsfengine: Unknown symbol cnxthsf_OsCriticalSectionCreate
hsfengine: Unknown symbol cnxthsf_OsLockLock
hsfengine: Unknown symbol cnxthsf_OsLockUnlock
hsfengine: Unknown symbol cnxthsf_NVM_Read
hsfengine: Unknown symbol cnxthsf_OsLockDestroy
hsfengine: Unknown symbol cnxthsf_OsCreatePeriodicTimer
hsfengine: Unknown symbol cnxthsf_OsAtomicIncrement
ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:11.5 to 64
hsfserial: Unknown symbol cnxthsf_ComCtrl_Read
hsfserial: Unknown symbol cnxthsf_ComCtrl_Create
hsfserial: Unknown symbol cnxthsf_ComCtrl_Control
hsfserial: Unknown symbol cnxthsf_OsThreadScheduleDone
hsfserial: Unknown symbol cnxthsf_OsThreadScheduleInit
hsfserial: Unknown symbol cnxthsf_OsMdmThread
hsfserial: Unknown symbol cnxthsf_ComCtrl_Close
hsfserial: Unknown symbol cnxthsf_ComCtrl_Write
hsfserial: Unknown symbol cnxthsf_ComCtrl_Open
hsfserial: Unknown symbol cnxthsf_NVM_WriteFlushList
hsfserial: Unknown symbol cnxthsf_ComCtrl_Monitor
hsfserial: Unknown symbol cnxthsf_ComCtrl_Configure
hsfserial: Unknown symbol cnxthsf_OsDcpEnsureDaemonIsRunning
hsfserial: Unknown symbol cnxthsf_OsThreadSchedule
hsfserial: Unknown symbol cnxthsf_ComCtrl_Destroy
hsfmc97via: Unknown symbol cnxthsf_OsCriticalSectionAcquire
hsfmc97via: Unknown symbol cnxthsf_OsIoPortReadl
hsfmc97via: Unknown symbol cnxthsf_OsPciWriteConfigb
hsfmc97via: Unknown symbol cnxthsf_OsSleep
hsfmc97via: Unknown symbol cnxthsf_OsEventCreate
hsfmc97via: Unknown symbol cnxthsf_OsCriticalSectionDestroy
hsfmc97via: Unknown symbol cnxthsf_cnxt_serial_add
hsfmc97via: Unknown symbol cnxthsf_OsMemDMAAllocate
hsfmc97via: Unknown symbol cnxthsf_cnxt_serial_remove
hsfmc97via: Unknown symbol cnxthsf_OsPciWriteConfigw
hsfmc97via: Unknown symbol cnxthsf_OsEventClear
hsfmc97via: Unknown symbol cnxthsf_OsCancelTimer
hsfmc97via: Unknown symbol cnxthsf_OsPciReadConfigb
hsfmc97via: Unknown symbol cnxthsf_ComCtrl_Control
hsfmc97via: Unknown symbol cnxthsf_OsCriticalSectionRelease
hsfmc97via: Unknown symbol cnxthsf_OsAllocate
hsfmc97via: Unknown symbol cnxthsf_OsMemDMAFree
hsfmc97via: Unknown symbol cnxthsf_OsSprintf
hsfmc97via: Unknown symbol cnxthsf_OsIoPortWritew
hsfmc97via: Unknown symbol cnxthsf_OsErrorPrintf
hsfmc97via: Unknown symbol cnxthsf_OsIoPortWriteb
hsfmc97via: Unknown symbol cnxthsf_OsGetProcessorFreq
hsfmc97via: Unknown symbol cnxthsf_OsEventWaitTime
hsfmc97via: Unknown symbol cnxthsf_OsGetPCIDeviceResources
hsfmc97via: Unknown symbol cnxthsf_OsEventSet
hsfmc97via: Unknown symbol cnxthsf_OsIoPortReadw
hsfmc97via: Unknown symbol cnxthsf_OsSetTimer
hsfmc97via: Unknown symbol cnxthsf_OsIoPortWritel
hsfmc97via: Unknown symbol cnxthsf_OsDestroyTimer
hsfmc97via: Unknown symbol cnxthsf_OsEventDestroy
hsfmc97via: Unknown symbol cnxthsf_OsFree
hsfmc97via: Unknown symbol cnxthsf_OsIoPortReadb
hsfmc97via: Unknown symbol cnxthsf_OsChangeTimerTimeOut
hsfmc97via: Unknown symbol cnxthsf_OsHookInterrupt
hsfmc97via: Unknown symbol cnxthsf_OsKernelUsesRegParm
hsfmc97via: Unknown symbol cnxthsf_OsMemCpy
hsfmc97via: Unknown symbol cnxthsf_OsUnhookInterrupt
hsfmc97via: Unknown symbol cnxthsf_OsCriticalSectionCreate
hsfmc97via: Unknown symbol cnxthsf_OsPciReadConfigdw
hsfmc97via: Unknown symbol cnxthsf_OsPciWriteConfigdw
hsfmc97via: Unknown symbol cnxthsf_OsStrCat
hsfmc97via: Unknown symbol cnxthsf_OsCreateTimer
hsfmc97via: Unknown symbol cnxthsf_OsPciReadConfigw
usb 1-2: USB disconnect, address 2
codec_read: codec 0 is not valid [0xfe0000]
codec_read: codec 0 is not valid [0xfe0000]
codec_read: codec 0 is not valid [0xfe0000]
codec_read: codec 0 is not valid [0xfe0000]
radeonfb_pci_register BEGIN
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 20
PCI: Unable to reserve mem region #1:8000000 a e8000000 for device 0000:01:
00.0
radeonfb (0000:01:00.0): cannot request region 0.
radeonfb: probe of 0000:01:00.0 failed with error -16
ACPI: PCI Interrupt 0000:00:11.6[C] -> GSI 22 (level, low) -> IRQ 19
usb 1-2: new full speed USB device using uhci_hcd and address 3
hdb: ATAPI 40X DVD-ROM drive, 512kB Cache, DMA
Uniform CD-ROM driver Revision: 3.20
usb 1-2: configuration #1 chosen from 1 choice
scsi3 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
scsi 3:0:0:0: Direct-Access IC USB Storage-CFC 322E PQ: 0 ANSI: 0
CCS
Linux video capture interface: v2.00
sd 3:0:0:0: [sda] Attached SCSI removable disk
scsi 3:0:0:1: Direct-Access IC USB Storage-SMC 322E PQ: 0 ANSI: 0
CCS
sd 3:0:0:1: [sdb] Attached SCSI removable disk
scsi 3:0:0:2: Direct-Access IC USB Storage-MMC 322E PQ: 0 ANSI: 0
CCS
sd 3:0:0:2: [sdd] Attached SCSI removable disk
scsi 3:0:0:3: Direct-Access IC USB Storage-MSC 322E PQ: 0 ANSI: 0
CCS
sd 3:0:0:3: [sde] Attached SCSI removable disk
usb-storage: device scan complete
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
sr 1:0:0:0: Attached scsi CD-ROM sr0
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5
sd 3:0:0:0: Attached scsi generic sg2 type 0
sd 3:0:0:1: Attached scsi generic sg3 type 0
sd 3:0:0:2: Attached scsi generic sg4 type 0
sd 3:0:0:3: Attached scsi generic sg5 type 0
usb 3-1: new full speed USB device using uhci_hcd and address 3
usb 3-1: configuration #1 chosen from 1 choice
/usr/src/RPM/BUILD/kernel-extramodules-2.6.22mamba/gspcav1-20070508/gspca_core.c:
USB GSPCA camera found. (SPCA501 )
/usr/src/RPM/BUILD/kernel-extramodules-2.6.22mamba/gspcav1-20070508/gspca_core.c:
[spca5xx_probe:4098] Camera type YUYV
PCI: Setting latency timer of device 0000:00:11.6 to 64
/usr/src/RPM/BUILD/kernel-extramodules-2.6.22mamba/gspcav1-20070508/gspca_core.c:
[spca5xx_getcapability:1215] maxw 640 maxh 480 minw 160 minh 120
usbcore: registered new interface driver gspca
/usr/src/RPM/BUILD/kernel-extramodules-2.6.22mamba/gspcav1-20070508/gspca_core.c:
gspca driver 01.00.18 registered
ACPI: PCI interrupt for device 0000:00:11.6 disabled
VIA 82xx Modem: probe of 0000:00:11.6 failed with error -13
fbsplash: switched splash state to 'off' on console 0
Realtime LSM initialized (group 11, mlock=1)
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on hda2, internal journal
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on hda4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
fuse init (API version 7.8)
Adding 522104k swap on /dev/hda3. Priority:1 extents:1 across:522104k
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
input: Power Button (FF) as /class/input/input3
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input4
ACPI: Power Button (CM) [PWRB]
skge eth0: enabling interface
skge eth0: Link is up at 100 Mbps, full duplex, flow control both
[drm] Initialized drm 1.1.0 20060810
[drm] Initialized radeon 1.27.0 20060524 on minor 0
agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[drm] Setting GART location based on new memory map
[drm] Loading R200 Microcode
[drm] writeback test succeeded in 1 usecs
fusd: starting, $Revision: 1.97-kor-hacked-11 $, $Date: 2003/07/11 22:29:39
$, debuglevel=2
cdev control id: 263192576
fusd: registration successful
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
eth0: no IPv6 routers present
ata2.00: 16 bytes trailing data
ata2.00: 16 bytes trailing data
ata2.00: 16 bytes trailing data
cdrom: This disc doesn't have any tracks I recognize!
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0xad data 32 in
res 40/00:02:00:5c:01/00:00:00:00:00/a0 Emask 0x4 (timeout)
ata2: soft resetting port
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x2a data 63488
out
res 40/00:02:00:0c:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
ata2: port is slow to respond, please be patient (Status 0xc0)
ata2: soft resetting port
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x55 data 16 out
res 40/00:03:00:00:20/00:00:00:00:00/a0 Emask 0x4 (timeout)
ata2: port is slow to respond, please be patient (Status 0xc0)
ata2: soft resetting port
ata2.00: qc timeout (cmd 0xa1)
ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
ata2.00: revalidation failed (errno=-5)
ata2: failed to recover some devices, retrying in 5 secs
ata2: port is slow to respond, please be patient (Status 0xc0)
ata2: soft resetting port
ata2.00: qc timeout (cmd 0xa1)
ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
ata2.00: revalidation failed (errno=-5)
ata2.00: limiting speed to UDMA/100:PIO3
ata2: failed to recover some devices, retrying in 5 secs
ata2: port is slow to respond, please be patient (Status 0xc0)
ata2: soft resetting port
ata2.00: qc timeout (cmd 0xa1)
ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
ata2.00: revalidation failed (errno=-5)
ata2.00: disabled
ata2: EH complete
[root a acolazione ansax]#
2007/12/6, Silvan Calarco <silvan.calarco a mambasoft.it>:
>
> Forse c'č un errore segnalato dal driver, guarda l'output del comando
> dmesg ed
> eventualmente mandamelo. Inoltre, riesci a masterizzare i DVD?
>
> ciao,
> Silvan
>
> Alle giovedė 6 dicembre 2007, andrea sabba ha scritto:
> > tra l'altro poi ogni volta che esce l'errore,
> > il masterizzatore scompare dal sistema,
> > non si puo' pių montarlo e non apre nemmeno
> > il cassettino, per togliere il cd,
> > bisogna riavviare il sistema.
> > c'č una soluzione pių pratica e veloce, senza dover ogni volta
> riavviare?
> > grazie ciao.
> >
> > 2007/12/6, andrea sabba <a.sabba a gmail.com>:
> > > ho fatto gli aggiornamenti che mi hai gentilmente segnalato,
> > > ma pur se da utente root, ilmasterizzatore non scrive.
> > > questo č il debug:
> > >
> > > System
> > > -----------------------
> > > K3b Version: 1.0.4
> > >
> > > KDE Version: 3.5.8
> > > QT Version: 3.3.8
> > > Kernel: 2.6.22mamba
> > > Devices
> > > -----------------------
> > > HL-DT-ST DVDRAM GSA-H62N CL00 (/dev/sr0, ) [CD-R, CD-RW, CD-ROM,
> DVD-ROM,
> > > DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL] [DVD-ROM, DVD-R
> > > sequenziale, DVD-R sequenziale a doppio strato, DVD-R jump a doppio
> > > strato, DVD-RAM, DVD-RW a riscrittura limitata, DVD-RW sequenziale,
> > > DVD+RW, DVD+R, DVD+R a doppio strato, CD-ROM, CD-R, CD-RW] [SAO, TAO,
> > > RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Riscrittura
> > > limitata, Livello Jump]
> > >
> > > SAMSUNG DVD-ROM SD-612S SS04 (/dev/hdb, ) [CD-ROM, DVD-ROM] [DVD-ROM,
> > > CD-ROM] [Nessuno]
> > > K3bIsoImager
> > > -----------------------
> > > mkisofs print size result: 179301 (367208448 bytes)
> > > Pipe throughput: 4388864 bytes read, 4373248 bytes written.
> > >
> > > Used versions
> > > -----------------------
> > > mkisofs: 1.1.6
> > > cdrecord: 1.1.6
> > >
> > > cdrecord
> > > -----------------------
> > > scsidev: '/dev/sr0'
> > > devname: '/dev/sr0'
> > > scsibus: -2 target: -2 lun: -2
> > > Linux sg driver version: 3.5.27
> > > Wodim version: 1.1.6
> > > SCSI buffer size: 64512
> > > Beginning DMA speed test. Set CDR_NODMATEST environment variable if
> > > device communication breaks or freezes immediately after that.
> > > TOC Type: 3 = CD-ROM XA mode 2
> > > Driveropts: 'burnfree'
> > > Device type : Removable CD-ROM
> > > Version : 5
> > > Response Format: 2
> > > Capabilities :
> > > Vendor_info : 'HL-DT-ST'
> > > Identification : 'DVDRAM GSA-H62N '
> > > Revision : 'CL00'
> > > Device seems to be: Generic mmc2 DVD-R/DVD-RW.
> > > Current: 0x000A (CD-RW)
> > > Profile: 0x0012 (DVD-RAM)
> > > Profile: 0x0011 (DVD-R sequential recording)
> > > Profile: 0x0015 (DVD-R/DL sequential recording)
> > > Profile: 0x0016 (DVD-R/DL layer jump recording)
> > > Profile: 0x0014 (DVD-RW sequential recording)
> > > Profile: 0x0013 (DVD-RW restricted overwrite)
> > > Profile: 0x001A (DVD+RW)
> > > Profile: 0x001B (DVD+R)
> > > Profile: 0x002B (DVD+R/DL)
> > > Profile: 0x0010 (DVD-ROM)
> > > Profile: 0x0009 (CD-R)
> > > Profile: 0x000A (CD-RW) (current)
> > > Profile: 0x0008 (CD-ROM)
> > > Profile: 0x0002 (Removable disk)
> > > Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
> > > Driver flags : MMC-3 SWABAUDIO BURNFREE
> > > Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P
> > > RAW/R96R
> > > Drive buf size : 1053696 = 1029 KB
> > > Drive DMA Speed: 17203 kB/s 97x CD 12x DVD
> > > FIFO size : 4194304 = 4096 KB
> > > Speed set to 1764 KB/s
> > > Track 01: data 350 MB
> > > Total size: 402 MB (39:50.70) = 179303 sectors
> > > Lout start: 402 MB (39:52/53) = 179303 sectors
> > > Current Secsize: 2048
> > > ATIP info from disk:
> > > Indicated writing power: 2
> > > Reference speed: 6
> > > Is not unrestricted
> > > Is erasable
> > > Disk sub type: High speed Rewritable (CAV) media (1)
> > > ATIP start of lead in: -11077 (97:34/23)
> > > ATIP start of lead out: 336075 (74:43/00)
> > > 1T speed low: 4 1T speed high: 10
> > > 2T speed low: 2 2T speed high: 10
> > > power mult factor: 2 6
> > > recommended erase/write power: 5
> > > A1 values: 24 2C DC
> > > A2 values: 14 A4 4A
> > > Disk type: Phase change
> > > Manuf. index: 11
> > > Manufacturer: Mitsubishi Chemical Corporation
> > > Blocks total: 336075 Blocks current: 336075 Blocks remaining: 156772
> > > Starting to write CD/DVD at speed 10.0 in real TAO mode for multi
> > > session.
> > > Last chance to quit, starting real write in 2 seconds.
> > > 1 seconds.
> > > 0 seconds. Operation starts.
> > > Waiting for reader process to fill input buffer ... input buffer
> ready.
> > > Performing OPC...
> > > Starting new track at sector: 0
> > > Track 01: 0 of 350 MB written.
> > > Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error
> > > CDB: 2A 00 00 00 00 5D 00 00 1F 00
> > > status: 0x2 (CHECK CONDITION)
> > > Sense Bytes: 72 0B 00 00 00 00 00 0E 09 0C 00 00 00 02 00 00
> > > Sense Key: 0x0 No Additional Sense, Segment 11
> > > Sense Code: 0x00 Qual 0x02 (end-of-partition/medium detected) Fru 0x0
> > > Sense flags: Blk 0 (not valid)
> > > cmd finished after 50.529s timeout 40s
> > > /usr/bin/wodim: A write error occured.
> > > /usr/bin/wodim: Please properly read the error message above.
> > > write track data: error after 190464 bytes
> > > Writing time: 63.448s
> > > Average write speed 37.7x.
> > > Fixating...
> > > Fixating time: 33.231s
> > > Errno: 5 (Input/output error), prevent/allow medium removal scsi
> sendcmd:
> > > fatal error
> > > CDB: 1E 00 00 00 00 00
> > > cmd finished after 0.000s timeout 40s
> > > Errno: 5 (Input/output error), start/stop unit scsi sendcmd: fatal
> error
> > > CDB: 1B 00 00 00 02 00
> > > cmd finished after 0.000s timeout 40s
> > > /usr/bin/wodim: Cannot eject media.
> > > /usr/bin/wodim: fifo had 67 puts and 4 gets.
> > > /usr/bin/wodim: fifo was 0 times empty and 1 times full, min fill was
> 95%
>
>
>
> --
> mambaSoft di Silvan Calarco - http://www.mambasoft.it
> openmamba GNU/Linux development - http://www.openmamba.org
>
-------------- parte successiva --------------
Un allegato HTML č stato rimosso...
URL: http://tao/pipermail/openmamba-users-it/attachments/20071206/5ad904c2/attachment-0001.html
Maggiori informazioni sulla lista
openmamba-users-it