[openmamba-users-it] Masterizzatore sata:
andrea sabba
a.sabba a gmail.com
Sab 8 Dic 2007 11:31:28 CET
silvan, scusami se Ti disturbo,
hai novitā per il masterizzatore sata.
io continuo a non riuscire, oltretutto dopo che k3b mi rimanda l'errore e
non riesce nč a scrivere nč a cancellare nessun supporto, compresi i dvd, la
periferica scompare dal sistema e bisogna riavviare.
infatti, anche se inserisco un supporto qualsiasi, non parte in automatico e
non me lo fā montare.
ciao e grazie.
2007/12/6, andrea sabba <a.sabba a gmail.com>:
>
> ho provato solo con un cd-rw,
> dvd avevo provato a cancellarlo per ulteriore verifica,
> nessun risultato gira in eterno.
> ecco il dmesg
> (fatto con il masterizzatore inutilizzabile, dopo l'errore di k3b):
>
>
> [root a acolazione ansax]# dmesg
> Linux version 2.6.22mamba (silvan a tao) (gcc version 4.2.1) #1 SMP PREEMPT
> Mon Nov 5 17:54:01 CET 2007
> BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
> BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000004fffc000 (usable)
> BIOS-e820: 000000004fffc000 - 000000004ffff000 (ACPI data)
> BIOS-e820: 000000004ffff000 - 0000000050000000 (ACPI NVS)
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
> 383MB HIGHMEM available.
> 896MB LOWMEM available.
> Entering add_active_range(0, 0, 327676) 0 entries of 256 used
> Zone PFN ranges:
> DMA 0 -> 4096
> Normal 4096 -> 229376
> HighMem 229376 -> 327676
> early_node_map[1] active PFN ranges
> 0: 0 -> 327676
> On node 0 totalpages: 327676
> DMA zone: 32 pages used for memmap
> DMA zone: 0 pages reserved
> DMA zone: 4064 pages, LIFO batch:0
> Normal zone: 1760 pages used for memmap
> Normal zone: 223520 pages, LIFO batch:31
> HighMem zone: 767 pages used for memmap
> HighMem zone: 97533 pages, LIFO batch:31
> DMI 2.3 present.
> ACPI: RSDP 000F62A0, 0014 (r0 ASUS )
> ACPI: RSDT 4FFFC000, 0030 (r1 ASUS A7V600 42302E31 MSFT 31313031)
> ACPI: FACP 4FFFC0B2, 0074 (r1 ASUS A7V600 42302E31 MSFT 31313031)
> ACPI: DSDT 4FFFC126, 2C4F (r1 ASUS A7V600 1000 MSFT 100000B)
> ACPI: FACS 4FFFF000, 0040
> ACPI: BOOT 4FFFC030, 0028 (r1 ASUS A7V600 42302E31 MSFT 31313031)
> ACPI: APIC 4FFFC058, 005A (r1 ASUS A7V600 42302E31 MSFT 31313031)
> ACPI: PM-Timer IO Port: 0xe408
> ACPI: Local APIC address 0xfee00000
> ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> Processor #0 6:10 APIC version 16
> ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
> ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
> IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl edge)
> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
> ACPI: IRQ0 used by override.
> ACPI: IRQ2 used by override.
> ACPI: IRQ9 used by override.
> Enabling APIC mode: Flat. Using 1 I/O APICs
> Using ACPI (MADT) for SMP configuration information
> Allocating PCI resources starting at 60000000 (gap: 50000000:aec00000)
> Built 1 zonelists. Total pages: 325117
> Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.22mamba resume2=
> root=/dev/hda2 video=vesafb:1024x768-32,ywrap,mtrr:3 quiet
> splash=silent,fadein console=tty1
> mapped APIC to ffffd000 (fee00000)
> mapped IOAPIC to ffffc000 (fec00000)
> Enabling fast FPU save and restore... done.
> Enabling unmasked SIMD FPU exception support... done.
> Initializing CPU#0
> PID hash table entries: 4096 (order: 12, 16384 bytes)
> Detected 1905.504 MHz processor.
> Console: colour VGA+ 80x25
> Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
> Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
> Memory: 1293000k/1310704k available (2408k kernel code, 16408k reserved,
> 921k data, 340k init, 393200k highmem)
> virtual kernel memory layout:
> fixmap : 0xfff4f000 - 0xfffff000 ( 704 kB)
> pkmap : 0xff800000 - 0xffc00000 (4096 kB)
> vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
> lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
> .init : 0xc0448000 - 0xc049d000 ( 340 kB)
> .data : 0xc035a208 - 0xc0440620 ( 921 kB)
> .text : 0xc0100000 - 0xc035a208 (2408 kB)
> Checking if this processor honours the WP bit even in supervisor mode...
> Ok.
> SLUB: Genslabs=22, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
> Calibrating delay using timer specific routine.. 3812.69 BogoMIPS
> (lpj=1906348)
> Security Framework v1.0.0 initialized
> Mount-cache hash table entries: 512
> CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000
> 00000000 00000000 00000000
> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> CPU: L2 Cache: 512K (64 bytes/line)
> CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420 00000000
> 00000000 00000000
> Intel machine check architecture supported.
> Intel machine check reporting enabled on CPU#0.
> Compat vDSO mapped to ffffe000.
> Checking 'hlt' instruction... OK.
> SMP alternatives: switching to UP code
> Freeing SMP alternatives: 12k freed
> ACPI: Core revision 20070126
> CPU0: AMD Athlon(TM) XP 2600+ stepping 00
> Total of 1 processors activated (3812.69 BogoMIPS).
> ENABLING IO-APIC IRQs
> ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
> Brought up 1 CPUs
> NET: Registered protocol family 16
> EISA bus registered
> ACPI: bus type pci registered
> PCI: PCI BIOS revision 2.10 entry at 0xf1970, last bus=1
> PCI: Using configuration type 1
> Setting up standard PCI resources
> ACPI: Interpreter enabled
> ACPI: (supports S0 S1 S4 S5)
> ACPI: Using IOAPIC for interrupt routing
> ACPI: PCI Root Bridge [PCI0] (0000:00)
> PCI: Probing PCI hardware (bus 00)
> PCI: enabled onboard AC97/MC97 devices
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
> ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12)
> ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled.
> ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled.
> ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled.
> ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12)
> ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12)
> ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11 12)
> ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12) *15
> Linux Plug and Play Support v0.97 (c) Adam Belay
> pnp: PnP ACPI init
> ACPI: bus type pnp registered
> pnp: PnP ACPI: found 16 devices
> ACPI: ACPI bus type pnp unregistered
> PnPBIOS: Disabled by ACPI PNP
> SCSI subsystem initialized
> usbcore: registered new interface driver usbfs
> usbcore: registered new interface driver hub
> usbcore: registered new device driver usb
> PCI: Using ACPI for IRQ routing
> PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a
> report
> Time: tsc clocksource has been installed.
> ACPI: RTC can wake from S4
> pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved
> pnp: 00:00: iomem range 0xf0000-0xfffff could not be reserved
> pnp: 00:00: iomem range 0x100000-0x4fffffff could not be reserved
> pnp: 00:00: iomem range 0xfec00000-0xfec000ff could not be reserved
> pnp: 00:02: ioport range 0xe400-0xe47f has been reserved
> pnp: 00:02: ioport range 0xe800-0xe81f has been reserved
> pnp: 00:02: iomem range 0xfff80000-0xffffffff could not be reserved
> pnp: 00:02: iomem range 0xffb80000-0xffbfffff has been reserved
> pnp: 00:0f: ioport range 0x290-0x297 has been reserved
> pnp: 00:0f: ioport range 0x370-0x375 has been reserved
> PCI: Bridge: 0000:00:01.0
> IO window: d000-dfff
> MEM window: d7000000-d7ffffff
> PREFETCH window: d8000000-efffffff
> PCI: Setting latency timer of device 0000:00:01.0 to 64
> NET: Registered protocol family 2
> IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
> TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
> TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
> TCP: Hash tables configured (established 131072 bind 65536)
> TCP reno registered
> checking if image is initramfs... it is
> Freeing initrd memory: 1282k freed
> Simple Boot Flag at 0x3a set to 0x1
> Machine check exception polling timer started.
> apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
> apm: overridden by ACPI.
> scx200: NatSemi SCx200 Driver
> highmem bounce pool size: 64 pages
> Total HugeTLB memory allocated, 0
> VFS: Disk quotas dquot_6.5.1
> Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
> Installing knfsd (copyright (C) 1996 okir a monad.swb.de).
> io scheduler noop registered
> io scheduler cfq registered (default)
> PCI: VIA PCI bridge detected. Disabling DAC.
> PCI: Bypassing VIA 8237 APIC De-Assert Message
> Boot video device is 0000:01:00.0
> Real Time Clock Driver v1.12ac
> Non-volatile memory driver v1.2
> vesafb: ATI Technologies Inc., V280, 01.00 (OEM: ATI RADEON 9200)
> vesafb: VBE version: 2.0
> vesafb: protected mode interface info at c000:577a
> vesafb: pmi: set display start = c00c580e, set palette = c00c585a
> vesafb: pmi: ports = d810 d816 d854 d838 d83c d85c d800 d804 d8b0 d8b2
> d8b4
> vesafb: no monitor limits have been set
> vesafb: scrolling: ywrap using protected mode interface, yres_virtual=2560
> vesafb: VBE state buffer size cannot be determined (eax: 0x0)
> Switched to high resolution mode on CPU 0
> Console: switching to colour frame buffer device 128x48
> fbsplash: console 0 using theme 'default'
> fbsplash: switched splash state to 'on' on console 0
> vesafb: framebuffer at 0xe8000000, mapped to 0xf8880000, using 10240k,
> total 16384k
> fb0: VESA VGA frame buffer device
> isapnp: Scanning for PnP cards...
> isapnp: No Plug & Play device found
> Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
> serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
> 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> 00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
> Floppy drive(s): fd0 is 1.44M
> FDC 0 is a post-1991 82077
> RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
> loop: module loaded
> v2.3 : Micro Memory(tm) PCI memory board block driver
> MM: desc_per_page = 128
> input: Macintosh mouse button emulation as /class/input/input0
> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> ide: Assuming 33MHz system bus speed for PIO modes; override with
> idebus=xx
> VP_IDE: IDE controller at PCI slot 0000:00:0f.1
> ACPI: PCI Interrupt 0000:00: 0f.1[A] -> GSI 20 (level, low) -> IRQ 16
> VP_IDE: chipset revision 6
> VP_IDE: not 100% native mode: will probe irqs later
> VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
> ide0: BM-DMA at 0x9400-0x9407, BIOS settings: hda:DMA, hdb:DMA
> ide1: BM-DMA at 0x9408-0x940f, BIOS settings: hdc:pio, hdd:DMA
> Probing IDE interface ide0...
> hda: Maxtor 6Y080L0, ATA DISK drive
> hdb: SS04 SAMSUNG DVD-ROM SD-612S, ATAPI CD/DVD-ROM drive
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> Probing IDE interface ide1...
> hdd: Maxtor 6Y160P0, ATA DISK drive
> ide1 at 0x170-0x177,0x376 on irq 15
> hda: max request size: 128KiB
> hda: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=65535/16/63,
> UDMA(133)
> hda: cache flushes supported
> hda: hda1 hda2 hda3 hda4
> hdd: max request size: 512KiB
> hdd: 320173056 sectors (163928 MB) w/7936KiB Cache, CHS=19929/255/63,
> UDMA(133)
> hdd: cache flushes supported
> hdd: hdd1 hdd3 hdd4
> usbcore: registered new interface driver libusual
> PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
> serio: i8042 KBD port at 0x60,0x64 irq 1
> serio: i8042 AUX port at 0x60,0x64 irq 12
> mice: PS/2 mouse device common for all mice
> input: AT Translated Set 2 keyboard as /class/input/input1
> EISA: Probing bus 0 at eisa.0
> Cannot allocate resource for EISA slot 8
> EISA: Detected 0 cards.
> Advanced Linux Sound Architecture Driver Version 1.0.14 (Thu May 31
> 09:03:25 2007 UTC).
> ALSA device list:
> No soundcards found.
> Initializing XFRM netlink socket
> NET: Registered protocol family 1
> NET: Registered protocol family 17
> NET: Registered protocol family 15
> Using IPI No-Shortcut mode
> Freeing unused kernel memory: 340k freed
> md: Autodetecting RAID arrays.
> md: autorun ...
> md: ... autorun DONE.
> EXT3-fs: INFO: recovery required on readonly filesystem.
> EXT3-fs: write access will be enabled during recovery.
> kjournald starting. Commit interval 5 seconds
> EXT3-fs: recovery complete.
> EXT3-fs: mounted filesystem with ordered data mode.
> input: ImExPS/2 Generic Explorer Mouse as /class/input/input2
> USB Universal Host Controller Interface driver v3.0
> ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 17
> uhci_hcd 0000:00:10.0: UHCI Host Controller
> uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
> uhci_hcd 0000:00: 10.0: irq 17, io base 0x00009000
> usb usb1: configuration #1 chosen from 1 choice
> hub 1-0:1.0: USB hub found
> hub 1-0:1.0: 2 ports detected
> ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 17
> uhci_hcd 0000:00:10.1: UHCI Host Controller
> uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
> uhci_hcd 0000:00:10.1: irq 17, io base 0x00008800
> usb usb2: configuration #1 chosen from 1 choice
> hub 2-0:1.0: USB hub found
> hub 2-0:1.0: 2 ports detected
> rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
> rtc_cmos: probe of 00:05 failed with error -16
> Linux agpgart interface v0.102 (c) Dave Jones
> ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 17
> uhci_hcd 0000:00:10.2: UHCI Host Controller
> uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
> uhci_hcd 0000:00:10.2: irq 17, io base 0x00008400
> usb usb3: configuration #1 chosen from 1 choice
> hub 3-0:1.0: USB hub found
> hub 3-0:1.0: 2 ports detected
> pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> libata version 2.21 loaded.
> ACPI: PCI Interrupt 0000:00: 10.3[B] -> GSI 21 (level, low) -> IRQ 17
> uhci_hcd 0000:00:10.3: UHCI Host Controller
> uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
> uhci_hcd 0000:00:10.3: irq 17, io base 0x00008000
> usb usb4: configuration #1 chosen from 1 choice
> hub 4-0:1.0: USB hub found
> hub 4-0:1.0: 2 ports detected
> slamr: module license 'Smart Link Ltd.' taints kernel.
> slamr: SmartLink AMRMO modem.
> parport_pc 00:09: reported by Plug and Play ACPI
> parport0: PC-style at 0x378 (0x778), irq 7, dma 3
> [PCSPP,TRISTATE,COMPAT,ECP,DMA]
> agpgart: Detected VIA KT400/KT400A/KT600 chipset
> usb 1-2: new full speed USB device using uhci_hcd and address 2
> agpgart: AGP aperture is 128M @ 0xf0000000
> shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
> PCI: Enabling device 0000:00:09.0 (0014 -> 0017)
> ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 18 (level, low) -> IRQ 18
> skge 1.11 addr 0xd6800000 irq 18 chip Yukon rev 1
> skge eth0: addr 00:0c:6e:ab:ef:8b
> sata_via 0000:00:0f.0: version 2.2
> ACPI: PCI Interrupt 0000:00:0f.0[A] -> GSI 20 (level, low) -> IRQ 16
> sata_via 0000:00:0f.0: routed to hard irq line 0
> scsi0 : sata_via
> scsi1 : sata_via
> ata1: SATA max UDMA/133 cmd 0x0001b400 ctl 0x0001b002 bmdma 0x0001a000 irq
> 16
> ata2: SATA max UDMA/133 cmd 0x0001a800 ctl 0x0001a402 bmdma 0x0001a008 irq
> 16
> gameport: NS558 PnP Gameport is pnp00:0e/gameport0, io 0x200, speed
> 1065kHz
> sk98lin: driver has been replaced by the skge driver and is scheduled for
> removal
> usb 1-2: configuration #1 chosen from 1 choice
> Initializing USB Mass Storage driver...
> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> ata1.00: ATA-7: Maxtor 7L250S0, BACE1G20, max UDMA/133
> ata1.00: 490234752 sectors, multi 16: LBA48 NCQ (depth 0/32)
> ata1.00: configured for UDMA/133
> usb 3-1: new full speed USB device using uhci_hcd and address 2
> ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> usb 3-1: configuration #1 chosen from 1 choice
> ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-H62N, CL00, max UDMA/100
> scsi2 : SCSI emulation for USB Mass Storage devices
> usb-storage: device found at 2
> usbcore: registered new interface driver usb-storage
> USB Mass Storage support registered.
> scsi 2:0:0:0: Direct-Access IC USB Storage-CFC 322E PQ: 0 ANSI:
> 0 CCS
> sd 2:0:0:0: [sda] Attached SCSI removable disk
> scsi 2:0:0:1: Direct-Access IC USB Storage-SMC 322E PQ: 0 ANSI:
> 0 CCS
> ata2.00: configured for UDMA/100
> sd 2:0:0:1: [sdb] Attached SCSI removable disk
> scsi 0:0:0:0: Direct-Access ATA Maxtor 7L250S0 BACE PQ: 0 ANSI:
> 5
> sd 0:0:0:0: [sdc] 490234752 512-byte hardware sectors (251000 MB)
> sd 0:0:0:0: [sdc] Write Protect is off
> sd 0:0:0:0: [sdc] Mode Sense: 00 3a 00 00
> scsi 2:0:0:2: Direct-Access IC USB Storage-MMC 322E PQ: 0 ANSI:
> 0 CCS
> sd 0:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't
> support DPO or FUA
> sd 0:0:0:0: [sdc] 490234752 512-byte hardware sectors (251000 MB)
> sd 0:0:0:0: [sdc] Write Protect is off
> sd 0:0:0:0: [sdc] Mode Sense: 00 3a 00 00
> sd 0:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't
> support DPO or FUA
> sdc:<5>sd 2:0:0:2: [sdd] Attached SCSI removable disk
> scsi 2:0:0:3: Direct-Access IC USB Storage-MSC 322E PQ: 0 ANSI:
> 0 CCS
> sd 2:0:0:3: [sde] Attached SCSI removable disk
> usb-storage: device scan complete
> sdc1 sdc2 < sdc5 >
> sd 0:0:0:0: [sdc] Attached SCSI disk
> scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-H62N CL00 PQ: 0 ANSI:
> 5
> slamr: probe 1106:3068 VIA3058 card...
> PCI: Enabling device 0000:00:11.6 (0000 -> 0001)
> ACPI: PCI Interrupt 0000:00:11.6[C] -> GSI 22 (level, low) -> IRQ 19
> PCI: Setting latency timer of device 0000:00: 11.6 to 64
> slamr: mc97 codec is ADS70
> slamr: cannot init card.
> ACPI: PCI interrupt for device 0000:00:11.6 disabled
> ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 17
> ehci_hcd 0000:00: 10.4: EHCI Host Controller
> ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
> ehci_hcd 0000:00:10.4: irq 17, io mem 0xd5800000
> ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
> usb usb5: configuration #1 chosen from 1 choice
> hub 5-0:1.0: USB hub found
> hub 5-0:1.0: 8 ports detected
> OsDcpInit: cannot register chrdev (-16)
> usb 3-1: USB disconnect, address 2
> hsfengine: Unknown symbol cnxthsf_OsCriticalSectionAcquire
> hsfengine: Unknown symbol cnxthsf_OsSleep
> hsfengine: Unknown symbol cnxthsf_OsCriticalSectionDestroy
> hsfengine: Unknown symbol cnxthsf_OsStrnCpy
> hsfengine: Unknown symbol cnxthsf_OsDiagMgrClose
> hsfengine: Unknown symbol cnxthsf_OsAtomicCompareAndSwapEx
> hsfengine: Unknown symbol cnxthsf_OsMemDMAAllocate
> hsfengine: Unknown symbol cnxthsf_OsGetCurrentThread
> hsfengine: Unknown symbol cnxthsf_OsDiagMgrOpen
> hsfengine: Unknown symbol cnxthsf_NVM_Close
> hsfengine: Unknown symbol cnxthsf_OsDebugPrintf
> hsfengine: Unknown symbol cnxthsf_OsLockTryUnlock
> hsfengine: Unknown symbol cnxthsf_DcpCallback
> hsfengine: Unknown symbol cnxthsf_OsStrCmp
> hsfengine: Unknown symbol cnxthsf_DcpSetVolume
> hsfengine: Unknown symbol cnxthsf_OsDestroyPeriodicTimer
> hsfengine: Unknown symbol cnxthsf_OsDebugBreakpoint
> hsfengine: Unknown symbol cnxthsf_NVM_Write
> hsfengine: Unknown symbol cnxthsf_DcpDestroy
> hsfengine: Unknown symbol cnxthsf_OsCriticalSectionRelease
> hsfengine: Unknown symbol cnxthsf_OsAtomicAdd
> hsfengine: Unknown symbol cnxthsf_OsIsDigit
> hsfengine: Unknown symbol cnxthsf_OsAllocate
> hsfengine: Unknown symbol cnxthsf_OsAtomicDecrement
> hsfengine: Unknown symbol cnxthsf_OsMemDMAFree
> hsfengine: Unknown symbol cnxthsf_OsSprintf
> hsfengine: Unknown symbol cnxthsf_NVM_Open
> hsfengine: Unknown symbol cnxthsf_OsToupper
> hsfengine: Unknown symbol cnxthsf_OsErrorPrintf
> hsfengine: Unknown symbol cnxthsf_OsMemSet
> hsfengine: Unknown symbol cnxthsf_OsFloatSuffix
> hsfengine: Unknown symbol cnxthsf_OsGetProcessorFreq
> hsfengine: Unknown symbol cnxthsf_OsGetSystemTime
> hsfengine: Unknown symbol cnxthsf_DcpCreate
> hsfengine: Unknown symbol cnxthsf_OsSetPeriodicTimer
> hsfengine: Unknown symbol cnxthsf_OsStrCpy
> hsfengine: Unknown symbol cnxthsf_OsMemMove
> hsfengine: Unknown symbol cnxthsf_OsLockTry
> hsfengine: Unknown symbol cnxthsf_OsStrLen
> hsfengine: Unknown symbol cnxthsf_OsFloatPrefix
> hsfengine: Unknown symbol cnxthsf_OsFree
> hsfengine: Unknown symbol cnxthsf_OsImmediateTimeOut
> hsfengine: Unknown symbol cnxthsf_OsDiagMgrNotify
> hsfengine: Unknown symbol cnxthsf_OsMemCpy
> hsfengine: Unknown symbol cnxthsf_OsLockCreate
> hsfengine: Unknown symbol cnxthsf_OsCriticalSectionCreate
> hsfengine: Unknown symbol cnxthsf_OsLockLock
> hsfengine: Unknown symbol cnxthsf_OsLockUnlock
> hsfengine: Unknown symbol cnxthsf_NVM_Read
> hsfengine: Unknown symbol cnxthsf_OsLockDestroy
> hsfengine: Unknown symbol cnxthsf_OsCreatePeriodicTimer
> hsfengine: Unknown symbol cnxthsf_OsAtomicIncrement
> ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 19
> PCI: Setting latency timer of device 0000:00:11.5 to 64
> hsfserial: Unknown symbol cnxthsf_ComCtrl_Read
> hsfserial: Unknown symbol cnxthsf_ComCtrl_Create
> hsfserial: Unknown symbol cnxthsf_ComCtrl_Control
> hsfserial: Unknown symbol cnxthsf_OsThreadScheduleDone
> hsfserial: Unknown symbol cnxthsf_OsThreadScheduleInit
> hsfserial: Unknown symbol cnxthsf_OsMdmThread
> hsfserial: Unknown symbol cnxthsf_ComCtrl_Close
> hsfserial: Unknown symbol cnxthsf_ComCtrl_Write
> hsfserial: Unknown symbol cnxthsf_ComCtrl_Open
> hsfserial: Unknown symbol cnxthsf_NVM_WriteFlushList
> hsfserial: Unknown symbol cnxthsf_ComCtrl_Monitor
> hsfserial: Unknown symbol cnxthsf_ComCtrl_Configure
> hsfserial: Unknown symbol cnxthsf_OsDcpEnsureDaemonIsRunning
> hsfserial: Unknown symbol cnxthsf_OsThreadSchedule
> hsfserial: Unknown symbol cnxthsf_ComCtrl_Destroy
> hsfmc97via: Unknown symbol cnxthsf_OsCriticalSectionAcquire
> hsfmc97via: Unknown symbol cnxthsf_OsIoPortReadl
> hsfmc97via: Unknown symbol cnxthsf_OsPciWriteConfigb
> hsfmc97via: Unknown symbol cnxthsf_OsSleep
> hsfmc97via: Unknown symbol cnxthsf_OsEventCreate
> hsfmc97via: Unknown symbol cnxthsf_OsCriticalSectionDestroy
> hsfmc97via: Unknown symbol cnxthsf_cnxt_serial_add
> hsfmc97via: Unknown symbol cnxthsf_OsMemDMAAllocate
> hsfmc97via: Unknown symbol cnxthsf_cnxt_serial_remove
> hsfmc97via: Unknown symbol cnxthsf_OsPciWriteConfigw
> hsfmc97via: Unknown symbol cnxthsf_OsEventClear
> hsfmc97via: Unknown symbol cnxthsf_OsCancelTimer
> hsfmc97via: Unknown symbol cnxthsf_OsPciReadConfigb
> hsfmc97via: Unknown symbol cnxthsf_ComCtrl_Control
> hsfmc97via: Unknown symbol cnxthsf_OsCriticalSectionRelease
> hsfmc97via: Unknown symbol cnxthsf_OsAllocate
> hsfmc97via: Unknown symbol cnxthsf_OsMemDMAFree
> hsfmc97via: Unknown symbol cnxthsf_OsSprintf
> hsfmc97via: Unknown symbol cnxthsf_OsIoPortWritew
> hsfmc97via: Unknown symbol cnxthsf_OsErrorPrintf
> hsfmc97via: Unknown symbol cnxthsf_OsIoPortWriteb
> hsfmc97via: Unknown symbol cnxthsf_OsGetProcessorFreq
> hsfmc97via: Unknown symbol cnxthsf_OsEventWaitTime
> hsfmc97via: Unknown symbol cnxthsf_OsGetPCIDeviceResources
> hsfmc97via: Unknown symbol cnxthsf_OsEventSet
> hsfmc97via: Unknown symbol cnxthsf_OsIoPortReadw
> hsfmc97via: Unknown symbol cnxthsf_OsSetTimer
> hsfmc97via: Unknown symbol cnxthsf_OsIoPortWritel
> hsfmc97via: Unknown symbol cnxthsf_OsDestroyTimer
> hsfmc97via: Unknown symbol cnxthsf_OsEventDestroy
> hsfmc97via: Unknown symbol cnxthsf_OsFree
> hsfmc97via: Unknown symbol cnxthsf_OsIoPortReadb
> hsfmc97via: Unknown symbol cnxthsf_OsChangeTimerTimeOut
> hsfmc97via: Unknown symbol cnxthsf_OsHookInterrupt
> hsfmc97via: Unknown symbol cnxthsf_OsKernelUsesRegParm
> hsfmc97via: Unknown symbol cnxthsf_OsMemCpy
> hsfmc97via: Unknown symbol cnxthsf_OsUnhookInterrupt
> hsfmc97via: Unknown symbol cnxthsf_OsCriticalSectionCreate
> hsfmc97via: Unknown symbol cnxthsf_OsPciReadConfigdw
> hsfmc97via: Unknown symbol cnxthsf_OsPciWriteConfigdw
> hsfmc97via: Unknown symbol cnxthsf_OsStrCat
> hsfmc97via: Unknown symbol cnxthsf_OsCreateTimer
> hsfmc97via: Unknown symbol cnxthsf_OsPciReadConfigw
> usb 1-2: USB disconnect, address 2
> codec_read: codec 0 is not valid [0xfe0000]
> codec_read: codec 0 is not valid [0xfe0000]
> codec_read: codec 0 is not valid [0xfe0000]
> codec_read: codec 0 is not valid [0xfe0000]
> radeonfb_pci_register BEGIN
> ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 20
> PCI: Unable to reserve mem region #1:8000000 a e8000000 for device 0000:01:
> 00.0
> radeonfb (0000:01:00.0): cannot request region 0.
> radeonfb: probe of 0000:01: 00.0 failed with error -16
> ACPI: PCI Interrupt 0000:00:11.6[C] -> GSI 22 (level, low) -> IRQ 19
> usb 1-2: new full speed USB device using uhci_hcd and address 3
> hdb: ATAPI 40X DVD-ROM drive, 512kB Cache, DMA
> Uniform CD-ROM driver Revision: 3.20
> usb 1-2: configuration #1 chosen from 1 choice
> scsi3 : SCSI emulation for USB Mass Storage devices
> usb-storage: device found at 3
> scsi 3:0:0:0: Direct-Access IC USB Storage-CFC 322E PQ: 0 ANSI:
> 0 CCS
> Linux video capture interface: v2.00
> sd 3:0:0:0: [sda] Attached SCSI removable disk
> scsi 3:0:0:1: Direct-Access IC USB Storage-SMC 322E PQ: 0 ANSI:
> 0 CCS
> sd 3:0:0:1: [sdb] Attached SCSI removable disk
> scsi 3:0:0:2: Direct-Access IC USB Storage-MMC 322E PQ: 0 ANSI:
> 0 CCS
> sd 3:0:0:2: [sdd] Attached SCSI removable disk
> scsi 3:0:0:3: Direct-Access IC USB Storage-MSC 322E PQ: 0 ANSI:
> 0 CCS
> sd 3:0:0:3: [sde] Attached SCSI removable disk
> usb-storage: device scan complete
> sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
> sr 1:0:0:0: Attached scsi CD-ROM sr0
> sd 0:0:0:0: Attached scsi generic sg0 type 0
> sr 1:0:0:0: Attached scsi generic sg1 type 5
> sd 3:0:0:0: Attached scsi generic sg2 type 0
> sd 3:0:0:1: Attached scsi generic sg3 type 0
> sd 3:0:0:2: Attached scsi generic sg4 type 0
> sd 3:0:0:3: Attached scsi generic sg5 type 0
> usb 3-1: new full speed USB device using uhci_hcd and address 3
> usb 3-1: configuration #1 chosen from 1 choice
> /usr/src/RPM/BUILD/kernel-extramodules-2.6.22mamba/gspcav1-20070508/gspca_core.c:
> USB GSPCA camera found. (SPCA501 )
> /usr/src/RPM/BUILD/kernel-extramodules-2.6.22mamba/gspcav1-20070508/gspca_core.c:
> [spca5xx_probe:4098] Camera type YUYV
> PCI: Setting latency timer of device 0000:00:11.6 to 64
> /usr/src/RPM/BUILD/kernel-extramodules-2.6.22mamba/gspcav1-20070508/gspca_core.c: [spca5xx_getcapability:1215] maxw 640 maxh
> 480 minw 160 minh 120
> usbcore: registered new interface driver gspca
> /usr/src/RPM/BUILD/kernel-extramodules-2.6.22mamba/gspcav1-20070508/gspca_core.c:
> gspca driver 01.00.18 registered
> ACPI: PCI interrupt for device 0000:00:11.6 disabled
> VIA 82xx Modem: probe of 0000:00:11.6 failed with error -13
> fbsplash: switched splash state to 'off' on console 0
> Realtime LSM initialized (group 11, mlock=1)
> EXT3-fs warning: maximal mount count reached, running e2fsck is
> recommended
> EXT3 FS on hda2, internal journal
> kjournald starting. Commit interval 5 seconds
> EXT3-fs warning: maximal mount count reached, running e2fsck is
> recommended
> EXT3 FS on hda4, internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> fuse init (API version 7.8)
> Adding 522104k swap on /dev/hda3. Priority:1 extents:1 across:522104k
> Bluetooth: Core ver 2.11
> NET: Registered protocol family 31
> Bluetooth: HCI device and connection manager initialized
> Bluetooth: HCI socket layer initialized
> Bluetooth: L2CAP ver 2.8
> Bluetooth: L2CAP socket layer initialized
> Bluetooth: HIDP (Human Interface Emulation) ver 1.2
> input: Power Button (FF) as /class/input/input3
> ACPI: Power Button (FF) [PWRF]
> input: Power Button (CM) as /class/input/input4
> ACPI: Power Button (CM) [PWRB]
> skge eth0: enabling interface
> skge eth0: Link is up at 100 Mbps, full duplex, flow control both
> [drm] Initialized drm 1.1.0 20060810
> [drm] Initialized radeon 1.27.0 20060524 on minor 0
> agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
> agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
> agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
> [drm] Setting GART location based on new memory map
> [drm] Loading R200 Microcode
> [drm] writeback test succeeded in 1 usecs
> fusd: starting, $Revision: 1.97-kor-hacked-11 $, $Date: 2003/07/11
> 22:29:39 $, debuglevel=2
> cdev control id: 263192576
> fusd: registration successful
> NET: Registered protocol family 10
> lo: Disabled Privacy Extensions
> eth0: no IPv6 routers present
> ata2.00: 16 bytes trailing data
> ata2.00: 16 bytes trailing data
> ata2.00: 16 bytes trailing data
> cdrom: This disc doesn't have any tracks I recognize!
> ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
> ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0xad data 32 in
> res 40/00:02:00:5c:01/00:00:00:00:00/a0 Emask 0x4 (timeout)
> ata2: soft resetting port
> ata2.00: configured for UDMA/100
> ata2: EH complete
> ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
> ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x2a data 63488
> out
> res 40/00:02:00:0c:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
> ata2: port is slow to respond, please be patient (Status 0xc0)
> ata2: soft resetting port
> ata2.00: configured for UDMA/100
> ata2: EH complete
> ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
> ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x55 data 16
> out
> res 40/00:03:00:00:20/00:00:00:00:00/a0 Emask 0x4 (timeout)
> ata2: port is slow to respond, please be patient (Status 0xc0)
> ata2: soft resetting port
> ata2.00: qc timeout (cmd 0xa1)
> ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
> ata2.00: revalidation failed (errno=-5)
> ata2: failed to recover some devices, retrying in 5 secs
> ata2: port is slow to respond, please be patient (Status 0xc0)
> ata2: soft resetting port
> ata2.00: qc timeout (cmd 0xa1)
> ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
> ata2.00: revalidation failed (errno=-5)
> ata2.00: limiting speed to UDMA/100:PIO3
> ata2: failed to recover some devices, retrying in 5 secs
> ata2: port is slow to respond, please be patient (Status 0xc0)
> ata2: soft resetting port
> ata2.00: qc timeout (cmd 0xa1)
> ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
> ata2.00: revalidation failed (errno=-5)
> ata2.00: disabled
> ata2: EH complete
> [root a acolazione ansax]#
>
>
> 2007/12/6, Silvan Calarco <silvan.calarco a mambasoft.it>:
> >
> > Forse c'č un errore segnalato dal driver, guarda l'output del comando
> > dmesg ed
> > eventualmente mandamelo. Inoltre, riesci a masterizzare i DVD?
> >
> > ciao,
> > Silvan
> >
> > Alle giovedė 6 dicembre 2007, andrea sabba ha scritto:
> > > tra l'altro poi ogni volta che esce l'errore,
> > > il masterizzatore scompare dal sistema,
> > > non si puo' pių montarlo e non apre nemmeno
> > > il cassettino, per togliere il cd,
> > > bisogna riavviare il sistema.
> > > c'č una soluzione pių pratica e veloce, senza dover ogni volta
> > riavviare?
> > > grazie ciao.
> > >
> > > 2007/12/6, andrea sabba <a.sabba a gmail.com>:
> > > > ho fatto gli aggiornamenti che mi hai gentilmente segnalato,
> > > > ma pur se da utente root, ilmasterizzatore non scrive.
> > > > questo č il debug:
> > > >
> > > > System
> > > > -----------------------
> > > > K3b Version: 1.0.4
> > > >
> > > > KDE Version: 3.5.8
> > > > QT Version: 3.3.8
> > > > Kernel: 2.6.22mamba
> > > > Devices
> > > > -----------------------
> > > > HL-DT-ST DVDRAM GSA-H62N CL00 (/dev/sr0, ) [CD-R, CD-RW, CD-ROM,
> > DVD-ROM,
> > > > DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL] [DVD-ROM, DVD-R
> > > > sequenziale, DVD-R sequenziale a doppio strato, DVD-R jump a doppio
> > > > strato, DVD-RAM, DVD-RW a riscrittura limitata, DVD-RW sequenziale,
> > > > DVD+RW, DVD+R, DVD+R a doppio strato, CD-ROM, CD-R, CD-RW] [SAO,
> > TAO,
> > > > RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Riscrittura
> > > > limitata, Livello Jump]
> > > >
> > > > SAMSUNG DVD-ROM SD-612S SS04 (/dev/hdb, ) [CD-ROM, DVD-ROM]
> > [DVD-ROM,
> > > > CD-ROM] [Nessuno]
> > > > K3bIsoImager
> > > > -----------------------
> > > > mkisofs print size result: 179301 (367208448 bytes)
> > > > Pipe throughput: 4388864 bytes read, 4373248 bytes written.
> > > >
> > > > Used versions
> > > > -----------------------
> > > > mkisofs: 1.1.6
> > > > cdrecord: 1.1.6
> > > >
> > > > cdrecord
> > > > -----------------------
> > > > scsidev: '/dev/sr0'
> > > > devname: '/dev/sr0'
> > > > scsibus: -2 target: -2 lun: -2
> > > > Linux sg driver version: 3.5.27
> > > > Wodim version: 1.1.6
> > > > SCSI buffer size: 64512
> > > > Beginning DMA speed test. Set CDR_NODMATEST environment variable if
> > > > device communication breaks or freezes immediately after that.
> > > > TOC Type: 3 = CD-ROM XA mode 2
> > > > Driveropts: 'burnfree'
> > > > Device type : Removable CD-ROM
> > > > Version : 5
> > > > Response Format: 2
> > > > Capabilities :
> > > > Vendor_info : 'HL-DT-ST'
> > > > Identification : 'DVDRAM GSA-H62N '
> > > > Revision : 'CL00'
> > > > Device seems to be: Generic mmc2 DVD-R/DVD-RW.
> > > > Current: 0x000A (CD-RW)
> > > > Profile: 0x0012 (DVD-RAM)
> > > > Profile: 0x0011 (DVD-R sequential recording)
> > > > Profile: 0x0015 (DVD-R/DL sequential recording)
> > > > Profile: 0x0016 (DVD-R/DL layer jump recording)
> > > > Profile: 0x0014 (DVD-RW sequential recording)
> > > > Profile: 0x0013 (DVD-RW restricted overwrite)
> > > > Profile: 0x001A (DVD+RW)
> > > > Profile: 0x001B (DVD+R)
> > > > Profile: 0x002B (DVD+R/DL)
> > > > Profile: 0x0010 (DVD-ROM)
> > > > Profile: 0x0009 (CD-R)
> > > > Profile: 0x000A (CD-RW) (current)
> > > > Profile: 0x0008 (CD-ROM)
> > > > Profile: 0x0002 (Removable disk)
> > > > Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
> > > > Driver flags : MMC-3 SWABAUDIO BURNFREE
> > > > Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P
> > > > RAW/R96R
> > > > Drive buf size : 1053696 = 1029 KB
> > > > Drive DMA Speed: 17203 kB/s 97x CD 12x DVD
> > > > FIFO size : 4194304 = 4096 KB
> > > > Speed set to 1764 KB/s
> > > > Track 01: data 350 MB
> > > > Total size: 402 MB (39:50.70) = 179303 sectors
> > > > Lout start: 402 MB (39:52/53) = 179303 sectors
> > > > Current Secsize: 2048
> > > > ATIP info from disk:
> > > > Indicated writing power: 2
> > > > Reference speed: 6
> > > > Is not unrestricted
> > > > Is erasable
> > > > Disk sub type: High speed Rewritable (CAV) media (1)
> > > > ATIP start of lead in: -11077 (97:34/23)
> > > > ATIP start of lead out: 336075 (74:43/00)
> > > > 1T speed low: 4 1T speed high: 10
> > > > 2T speed low: 2 2T speed high: 10
> > > > power mult factor: 2 6
> > > > recommended erase/write power: 5
> > > > A1 values: 24 2C DC
> > > > A2 values: 14 A4 4A
> > > > Disk type: Phase change
> > > > Manuf. index: 11
> > > > Manufacturer: Mitsubishi Chemical Corporation
> > > > Blocks total: 336075 Blocks current: 336075 Blocks remaining: 156772
> > > > Starting to write CD/DVD at speed 10.0 in real TAO mode for multi
> > > > session.
> > > > Last chance to quit, starting real write in 2 seconds.
> > > > 1 seconds.
> > > > 0 seconds. Operation starts.
> > > > Waiting for reader process to fill input buffer ... input buffer
> > ready.
> > > > Performing OPC...
> > > > Starting new track at sector: 0
> > > > Track 01: 0 of 350 MB written.
> > > > Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error
> > > > CDB: 2A 00 00 00 00 5D 00 00 1F 00
> > > > status: 0x2 (CHECK CONDITION)
> > > > Sense Bytes: 72 0B 00 00 00 00 00 0E 09 0C 00 00 00 02 00 00
> > > > Sense Key: 0x0 No Additional Sense, Segment 11
> > > > Sense Code: 0x00 Qual 0x02 (end-of-partition/medium detected) Fru
> > 0x0
> > > > Sense flags: Blk 0 (not valid)
> > > > cmd finished after 50.529s timeout 40s
> > > > /usr/bin/wodim: A write error occured.
> > > > /usr/bin/wodim: Please properly read the error message above.
> > > > write track data: error after 190464 bytes
> > > > Writing time: 63.448s
> > > > Average write speed 37.7x.
> > > > Fixating...
> > > > Fixating time: 33.231s
> > > > Errno: 5 (Input/output error), prevent/allow medium removal scsi
> > sendcmd:
> > > > fatal error
> > > > CDB: 1E 00 00 00 00 00
> > > > cmd finished after 0.000s timeout 40s
> > > > Errno: 5 (Input/output error), start/stop unit scsi sendcmd: fatal
> > error
> > > > CDB: 1B 00 00 00 02 00
> > > > cmd finished after 0.000s timeout 40s
> > > > /usr/bin/wodim: Cannot eject media.
> > > > /usr/bin/wodim: fifo had 67 puts and 4 gets.
> > > > /usr/bin/wodim: fifo was 0 times empty and 1 times full, min fill
> > was 95%
> >
> >
> >
> > --
> > mambaSoft di Silvan Calarco - http://www.mambasoft.it
> > openmamba GNU/Linux development - http://www.openmamba.org
> >
>
>
-------------- parte successiva --------------
Un allegato HTML č stato rimosso...
URL: http://tao/pipermail/openmamba-users-it/attachments/20071208/8ee4c0dc/attachment-0001.html
Maggiori informazioni sulla lista
openmamba-users-it