[openmamba-users-it] Masterizzatore sata:
Silvan Calarco
silvan.calarco a mambasoft.it
Gio 6 Dic 2007 14:49:37 CET
Forse c'č un errore segnalato dal driver, guarda l'output del comando dmesg ed
eventualmente mandamelo. Inoltre, riesci a masterizzare i DVD?
ciao,
Silvan
Alle giovedė 6 dicembre 2007, andrea sabba ha scritto:
> tra l'altro poi ogni volta che esce l'errore,
> il masterizzatore scompare dal sistema,
> non si puo' pių montarlo e non apre nemmeno
> il cassettino, per togliere il cd,
> bisogna riavviare il sistema.
> c'č una soluzione pių pratica e veloce, senza dover ogni volta riavviare?
> grazie ciao.
>
> 2007/12/6, andrea sabba <a.sabba a gmail.com>:
> > ho fatto gli aggiornamenti che mi hai gentilmente segnalato,
> > ma pur se da utente root, ilmasterizzatore non scrive.
> > questo č il debug:
> >
> > System
> > -----------------------
> > K3b Version: 1.0.4
> >
> > KDE Version: 3.5.8
> > QT Version: 3.3.8
> > Kernel: 2.6.22mamba
> > Devices
> > -----------------------
> > HL-DT-ST DVDRAM GSA-H62N CL00 (/dev/sr0, ) [CD-R, CD-RW, CD-ROM, DVD-ROM,
> > DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL] [DVD-ROM, DVD-R
> > sequenziale, DVD-R sequenziale a doppio strato, DVD-R jump a doppio
> > strato, DVD-RAM, DVD-RW a riscrittura limitata, DVD-RW sequenziale,
> > DVD+RW, DVD+R, DVD+R a doppio strato, CD-ROM, CD-R, CD-RW] [SAO, TAO,
> > RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Riscrittura
> > limitata, Livello Jump]
> >
> > SAMSUNG DVD-ROM SD-612S SS04 (/dev/hdb, ) [CD-ROM, DVD-ROM] [DVD-ROM,
> > CD-ROM] [Nessuno]
> > K3bIsoImager
> > -----------------------
> > mkisofs print size result: 179301 (367208448 bytes)
> > Pipe throughput: 4388864 bytes read, 4373248 bytes written.
> >
> > Used versions
> > -----------------------
> > mkisofs: 1.1.6
> > cdrecord: 1.1.6
> >
> > cdrecord
> > -----------------------
> > scsidev: '/dev/sr0'
> > devname: '/dev/sr0'
> > scsibus: -2 target: -2 lun: -2
> > Linux sg driver version: 3.5.27
> > Wodim version: 1.1.6
> > SCSI buffer size: 64512
> > Beginning DMA speed test. Set CDR_NODMATEST environment variable if
> > device communication breaks or freezes immediately after that.
> > TOC Type: 3 = CD-ROM XA mode 2
> > Driveropts: 'burnfree'
> > Device type : Removable CD-ROM
> > Version : 5
> > Response Format: 2
> > Capabilities :
> > Vendor_info : 'HL-DT-ST'
> > Identification : 'DVDRAM GSA-H62N '
> > Revision : 'CL00'
> > Device seems to be: Generic mmc2 DVD-R/DVD-RW.
> > Current: 0x000A (CD-RW)
> > Profile: 0x0012 (DVD-RAM)
> > Profile: 0x0011 (DVD-R sequential recording)
> > Profile: 0x0015 (DVD-R/DL sequential recording)
> > Profile: 0x0016 (DVD-R/DL layer jump recording)
> > Profile: 0x0014 (DVD-RW sequential recording)
> > Profile: 0x0013 (DVD-RW restricted overwrite)
> > Profile: 0x001A (DVD+RW)
> > Profile: 0x001B (DVD+R)
> > Profile: 0x002B (DVD+R/DL)
> > Profile: 0x0010 (DVD-ROM)
> > Profile: 0x0009 (CD-R)
> > Profile: 0x000A (CD-RW) (current)
> > Profile: 0x0008 (CD-ROM)
> > Profile: 0x0002 (Removable disk)
> > Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
> > Driver flags : MMC-3 SWABAUDIO BURNFREE
> > Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P
> > RAW/R96R
> > Drive buf size : 1053696 = 1029 KB
> > Drive DMA Speed: 17203 kB/s 97x CD 12x DVD
> > FIFO size : 4194304 = 4096 KB
> > Speed set to 1764 KB/s
> > Track 01: data 350 MB
> > Total size: 402 MB (39:50.70) = 179303 sectors
> > Lout start: 402 MB (39:52/53) = 179303 sectors
> > Current Secsize: 2048
> > ATIP info from disk:
> > Indicated writing power: 2
> > Reference speed: 6
> > Is not unrestricted
> > Is erasable
> > Disk sub type: High speed Rewritable (CAV) media (1)
> > ATIP start of lead in: -11077 (97:34/23)
> > ATIP start of lead out: 336075 (74:43/00)
> > 1T speed low: 4 1T speed high: 10
> > 2T speed low: 2 2T speed high: 10
> > power mult factor: 2 6
> > recommended erase/write power: 5
> > A1 values: 24 2C DC
> > A2 values: 14 A4 4A
> > Disk type: Phase change
> > Manuf. index: 11
> > Manufacturer: Mitsubishi Chemical Corporation
> > Blocks total: 336075 Blocks current: 336075 Blocks remaining: 156772
> > Starting to write CD/DVD at speed 10.0 in real TAO mode for multi
> > session.
> > Last chance to quit, starting real write in 2 seconds.
> > 1 seconds.
> > 0 seconds. Operation starts.
> > Waiting for reader process to fill input buffer ... input buffer ready.
> > Performing OPC...
> > Starting new track at sector: 0
> > Track 01: 0 of 350 MB written.
> > Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error
> > CDB: 2A 00 00 00 00 5D 00 00 1F 00
> > status: 0x2 (CHECK CONDITION)
> > Sense Bytes: 72 0B 00 00 00 00 00 0E 09 0C 00 00 00 02 00 00
> > Sense Key: 0x0 No Additional Sense, Segment 11
> > Sense Code: 0x00 Qual 0x02 (end-of-partition/medium detected) Fru 0x0
> > Sense flags: Blk 0 (not valid)
> > cmd finished after 50.529s timeout 40s
> > /usr/bin/wodim: A write error occured.
> > /usr/bin/wodim: Please properly read the error message above.
> > write track data: error after 190464 bytes
> > Writing time: 63.448s
> > Average write speed 37.7x.
> > Fixating...
> > Fixating time: 33.231s
> > Errno: 5 (Input/output error), prevent/allow medium removal scsi sendcmd:
> > fatal error
> > CDB: 1E 00 00 00 00 00
> > cmd finished after 0.000s timeout 40s
> > Errno: 5 (Input/output error), start/stop unit scsi sendcmd: fatal error
> > CDB: 1B 00 00 00 02 00
> > cmd finished after 0.000s timeout 40s
> > /usr/bin/wodim: Cannot eject media.
> > /usr/bin/wodim: fifo had 67 puts and 4 gets.
> > /usr/bin/wodim: fifo was 0 times empty and 1 times full, min fill was 95%
--
mambaSoft di Silvan Calarco - http://www.mambasoft.it
openmamba GNU/Linux development - http://www.openmamba.org
Maggiori informazioni sulla lista
openmamba-users-it