[openmamba-users-it] Masterizzatore sata:
andrea sabba
a.sabba a gmail.com
Gio 6 Dic 2007 14:31:43 CET
ho fatto gli aggiornamenti che mi hai gentilmente segnalato,
ma pur se da utente root, ilmasterizzatore non scrive.
questo è il debug:
System
-----------------------
K3b Version: 1.0.4
KDE Version: 3.5.8
QT Version: 3.3.8
Kernel: 2.6.22mamba
Devices
-----------------------
HL-DT-ST DVDRAM GSA-H62N CL00 (/dev/sr0, ) [CD-R, CD-RW, CD-ROM, DVD-ROM,
DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL] [DVD-ROM, DVD-R
sequenziale, DVD-R sequenziale a doppio strato, DVD-R jump a doppio strato,
DVD-RAM, DVD-RW a riscrittura limitata, DVD-RW sequenziale, DVD+RW, DVD+R,
DVD+R a doppio strato, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P,
SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Riscrittura limitata, Livello Jump]
SAMSUNG DVD-ROM SD-612S SS04 (/dev/hdb, ) [CD-ROM, DVD-ROM] [DVD-ROM,
CD-ROM] [Nessuno]
K3bIsoImager
-----------------------
mkisofs print size result: 179301 (367208448 bytes)
Pipe throughput: 4388864 bytes read, 4373248 bytes written.
Used versions
-----------------------
mkisofs: 1.1.6
cdrecord: 1.1.6
cdrecord
-----------------------
scsidev: '/dev/sr0'
devname: '/dev/sr0'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.6
SCSI buffer size: 64512
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
TOC Type: 3 = CD-ROM XA mode 2
Driveropts: 'burnfree'
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'HL-DT-ST'
Identification : 'DVDRAM GSA-H62N '
Revision : 'CL00'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x000A (CD-RW)
Profile: 0x0012 (DVD-RAM)
Profile: 0x0011 (DVD-R sequential recording)
Profile: 0x0015 (DVD-R/DL sequential recording)
Profile: 0x0016 (DVD-R/DL layer jump recording)
Profile: 0x0014 (DVD-RW sequential recording)
Profile: 0x0013 (DVD-RW restricted overwrite)
Profile: 0x001A (DVD+RW)
Profile: 0x001B (DVD+R)
Profile: 0x002B (DVD+R/DL)
Profile: 0x0010 (DVD-ROM)
Profile: 0x0009 (CD-R)
Profile: 0x000A (CD-RW) (current)
Profile: 0x0008 (CD-ROM)
Profile: 0x0002 (Removable disk)
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1053696 = 1029 KB
Drive DMA Speed: 17203 kB/s 97x CD 12x DVD
FIFO size : 4194304 = 4096 KB
Speed set to 1764 KB/s
Track 01: data 350 MB
Total size: 402 MB (39:50.70) = 179303 sectors
Lout start: 402 MB (39:52/53) = 179303 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 2
Reference speed: 6
Is not unrestricted
Is erasable
Disk sub type: High speed Rewritable (CAV) media (1)
ATIP start of lead in: -11077 (97:34/23)
ATIP start of lead out: 336075 (74:43/00)
1T speed low: 4 1T speed high: 10
2T speed low: 2 2T speed high: 10
power mult factor: 2 6
recommended erase/write power: 5
A1 values: 24 2C DC
A2 values: 14 A4 4A
Disk type: Phase change
Manuf. index: 11
Manufacturer: Mitsubishi Chemical Corporation
Blocks total: 336075 Blocks current: 336075 Blocks remaining: 156772
Starting to write CD/DVD at speed 10.0 in real TAO mode for multi session.
Last chance to quit, starting real write in 2 seconds.
1 seconds.
0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Starting new track at sector: 0
Track 01: 0 of 350 MB written.
Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error
CDB: 2A 00 00 00 00 5D 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 72 0B 00 00 00 00 00 0E 09 0C 00 00 00 02 00 00
Sense Key: 0x0 No Additional Sense, Segment 11
Sense Code: 0x00 Qual 0x02 (end-of-partition/medium detected) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 50.529s timeout 40s
/usr/bin/wodim: A write error occured.
/usr/bin/wodim: Please properly read the error message above.
write track data: error after 190464 bytes
Writing time: 63.448s
Average write speed 37.7x.
Fixating...
Fixating time: 33.231s
Errno: 5 (Input/output error), prevent/allow medium removal scsi sendcmd:
fatal error
CDB: 1E 00 00 00 00 00
cmd finished after 0.000s timeout 40s
Errno: 5 (Input/output error), start/stop unit scsi sendcmd: fatal error
CDB: 1B 00 00 00 02 00
cmd finished after 0.000s timeout 40s
/usr/bin/wodim: Cannot eject media.
/usr/bin/wodim: fifo had 67 puts and 4 gets.
/usr/bin/wodim: fifo was 0 times empty and 1 times full, min fill was 95%.
cdrecord command:
-----------------------
/usr/bin/wodim -v gracetime=2 dev=/dev/sr0 speed=10 -tao driveropts=burnfree
-eject -multi -xa -tsize=179301s -
mkisofs
-----------------------
179301
I: -input-charset not specified, using utf-8 (detected in locale settings)
0.28% done, estimate finish Fri Dec 7 14:05:49 2007
0.56% done, estimate finish Fri Dec 7 02:22:59 2007
0.84% done, estimate finish Thu Dec 6 22:24:02 2007
1.12% done, estimate finish Thu Dec 6 20:20:45 2007
mkisofs calculate size command:
-----------------------
/usr/bin/genisoimage -gui -graft-points -print-size -quiet -volid Home
-volset -appid K3B THE CD KREATOR (C) 1998-2006 SEBASTIAN TRUEG AND THE K3B
TEAM -publisher -preparer -sysid LINUX -volset-size 1 -volset-seqno 1
-sort /tmp/kde-root/k3bS8uOcc.tmp -rational-rock -hide-list
/tmp/kde-root/k3bPQessb.tmp -joliet -joliet-long -hide-joliet-list
/tmp/kde-root/k3bdKrUac.tmp -no-cache-inodes -full-iso9660-filenames
-iso-level 2 -path-list /tmp/kde-root/k3bQPfFHb.tmp
mkisofs command:
-----------------------
/usr/bin/genisoimage -gui -graft-points -volid Home -volset -appid K3B THE
CD KREATOR (C) 1998-2006 SEBASTIAN TRUEG AND THE K3B TEAM -publisher
-preparer -sysid LINUX -volset-size 1 -volset-seqno 1 -sort
/tmp/kde-root/k3biS2Dya.tmp -rational-rock -hide-list
/tmp/kde-root/k3b4SqWMb.tmp -joliet -joliet-long -hide-joliet-list
/tmp/kde-root/k3b1DOc8b.tmp -no-cache-inodes -full-iso9660-filenames
-iso-level 2 -path-list /tmp/kde-root/k3bstlbYa.tmp
2007/12/6, Silvan Calarco <silvan.calarco a mambasoft.it>:
>
> Ho mandato sul repository cdrkit, una versione più recente e forse meglio
> mantenuta di cdrtools.
> Quindi ti direi di installare cdrkit (richiede anche che aggiorni
> cdrtools) e
> riprovare con k3b. Quest'ultimo si configurerà automaticamente per usare
> cdrkit e lo puoi verificare notando che al programma cdrecord sarà
> associato
> l'eseguibile /usr/bin/wodim.
> A questo punto prova e se hai ancora problemi posta di nuovo il log,
> altrimenti cdrkit diventa un buon candidato per sostituire cdrtools nella
> distribuzione.
>
> ciao,
> Silvan
>
> Alle giovedì 6 dicembre 2007, andrea sabba ha scritto:
> > intendevi questo?
> >
> > System
> > -----------------------
> > K3b Version: 1.0.4
> >
> > KDE Version: 3.5.8
> > QT Version: 3.3.8
> > Kernel: 2.6.22mamba
> > Devices
> > -----------------------
> > HL-DT-ST DVDRAM GSA-H62N CL00 (/dev/sr0, ) [CD-R, CD-RW, CD-ROM,
> DVD-ROM,
> > DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL] [DVD-ROM, DVD-R
> > sequenziale, DVD-R sequenziale a doppio strato, DVD-R jump a doppio
> strato,
> > DVD-RAM, DVD-RW a riscrittura limitata, DVD-RW sequenziale, DVD+RW,
> DVD+R,
> > DVD+R a doppio strato, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P,
> > SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Riscrittura limitata, Livello
> Jump]
> >
> > SAMSUNG DVD-ROM SD-612S SS04 (/dev/hdb, ) [CD-ROM, DVD-ROM] [DVD-ROM,
> > CD-ROM] [Nessuno]
> > K3bIsoImager
> > -----------------------
> > mkisofs print size result: 335516 (687136768 bytes)
> > Pipe throughput: 4192256 bytes read, 4176640 bytes written.
> >
> > Used versions
> > -----------------------
> > mkisofs: 2.1
> > cdrecord: 2.1
> >
> > cdrecord
> > -----------------------
> > /usr/bin/cdrecord: Warning: Running on Linux-2.6.22mamba
> > /usr/bin/cdrecord: There are unsettled issues with Linux-2.5 and newer.
> > /usr/bin/cdrecord: If you have unexpected problems, please try Linux-2.4or
> > Solaris.
> > scsidev: '/dev/sr0'
> > devname: '/dev/sr0'
> > scsibus: -2 target: -2 lun: -2
> > Warning: Open by 'devname' is unintentional and not supported.
> > Linux sg driver version: 3.5.27
> > SCSI buffer size: 64512
> > Cdrecord-Clone 2.01 (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg
> > Schilling
> > NOTE: this is OSS DVD extensions for cdrtools and thus may have bugs
> > related to DVD issues that are not present in the original cdrtools.
> For
> > more information see http://crashrecovery.org/oss-dvd.html. The
> original
> > cdrtools author should not be bothered with problems in this version.
> > TOC Type: 1 = CD-ROM
> > Using libscg version 'schily-0.8'.
> > Driveropts: 'burnfree'
> > atapi: 1
> > Device type : Removable CD-ROM
> > Version : 5
> > Response Format: 2
> > Capabilities :
> > Vendor_info : 'HL-DT-ST'
> > Identifikation : 'DVDRAM GSA-H62N '
> > Revision : 'CL00'
> > Device seems to be: Generic mmc2 DVD-R/DVD-RW.
> > Current: 0x000A
> > Profile: 0x0012
> > Profile: 0x0011
> > Profile: 0x0015
> > Profile: 0x0016
> > Profile: 0x0014
> > Profile: 0x0013
> > Profile: 0x001A
> > Profile: 0x001B
> > Profile: 0x002B
> > Profile: 0x0010
> > Profile: 0x0009
> > Profile: 0x000A (current)
> > Profile: 0x0008
> > Profile: 0x0002
> > Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
> > Driver flags : MMC-3 SWABAUDIO BURNFREE
> > Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P
> RAW/R96R
> > Drive buf size : 1053696 = 1029 KB
> > Drive DMA Speed: 16800 kB/s 95x CD 12x DVD
> > FIFO size : 4194304 = 4096 KB
> > Track 01: data 655 MB
> > Total size: 752 MB (74:33.54) = 335516 sectors
> > Lout start: 752 MB (74:35/41) = 335516 sectors
> > Current Secsize: 2048
> > ATIP info from disk:
> > Indicated writing power: 2
> > Reference speed: 6
> > Is not unrestricted
> > Is erasable
> > Disk sub type: High speed Rewritable (CAV) media (1)
> > ATIP start of lead in: -11077 (97:34/23)
> > ATIP start of lead out: 336075 (74:43/00)
> > 1T speed low: 4 1T speed high: 10
> > 2T speed low: 2 2T speed high: 10
> > power mult factor: 2 6
> > recommended erase/write power: 5
> > A1 values: 24 2C DC
> > A2 values: 14 A4 4A
> > Disk type: Phase change
> > Manuf. index: 11
> > Manufacturer: Mitsubishi Chemical Corporation
> > Blocks total: 336075 Blocks current: 336075 Blocks remaining: 559
> > Starting to write CD/DVD at speed 10 in real SAO mode for single
> session.
> > Last chance to quit, starting real write in 2 seconds.
> > 1 seconds.
> > 0 seconds. Operation starts.
> > Waiting for reader process to fill input buffer ... input buffer ready.
> > trackno=0
> > BURN-Free is OFF.
> > Turning BURN-Free on
> > Performing OPC...
> > Sending CUE sheet...
> > /usr/bin/cdrecord: CUE sheet not accepted. Retrying with minimum
> pregapsize
> > = 1.
> > /usr/bin/cdrecord: Input/output error. send_cue_sheet: scsi sendcmd: no
> > error
> > CDB: 5D 00 00 00 00 00 00 00 20 00
> > status: 0x2 (CHECK CONDITION)
> > Sense Bytes: 70 00 05 00 00 00 00 0A 5D 34 02 90 26 00 00 00
> > Sense Key: 0x5 Illegal Request, Segment 0
> > Sense Code: 0x26 Qual 0x00 (invalid field in parameter list) Fru 0x0
> > Sense flags: Blk 0 (not valid)
> > cmd finished after 0.002s timeout 200s
> > /usr/bin/cdrecord: CUE sheet still not accepted. Please try to write in
> RAW
> > (-raw96r) mode.
> > /usr/bin/cdrecord: Cannot send CUE sheet.
> > /usr/bin/cdrecord: Could not write Lead-in.
> > /usr/bin/cdrecord: faio_wait_on_buffer for writer timed out.
> > /usr/bin/cdrecord: Input/output error. prevent/allow medium removal:
> scsi
> > sendcmd: fatal error
> > CDB: 1E 00 00 00 00 00
> > cmd finished after 0.000s timeout 200s
> > Writing time: 331.828s
> > /usr/bin/cdrecord: Input/output error. start/stop unit: scsi sendcmd:
> fatal
> > error
> > CDB: 1B 00 00 00 02 00
> > cmd finished after 0.000s timeout 200s
> > /usr/bin/cdrecord: Cannot eject media.
> > Track 01: data 655 MB
> > Total size: 752 MB (74:33.54) = 335516 sectors
> > Lout start: 752 MB (74:35/41) = 335516 sectors
> > Current Secsize: 2048
> > ATIP info from disk:
> > Indicated writing power: 2
> > Reference speed: 6
> > Is not unrestricted
> > Is erasable
> > Disk sub type: High speed Rewritable (CAV) media (1)
> > ATIP start of lead in: -11077 (97:34/23)
> > ATIP start of lead out: 336075 (74:43/00)
> > 1T speed low: 4 1T speed high: 10
> > 2T speed low: 2 2T speed high: 10
> > power mult factor: 2 6
> > recommended erase/write power: 5
> > A1 values: 24 2C DC
> > A2 values: 14 A4 4A
> > Disk type: Phase change
> > Manuf. index: 11
> > Manufacturer: Mitsubishi Chemical Corporation
> > Blocks total: 336075 Blocks current: 336075 Blocks remaining: 559
> > /usr/bin/cdrecord: Input/output error. prevent/allow medium removal:
> scsi
> > sendcmd: fatal error
> > CDB: 1E 00 00 00 00 00
> > cmd finished after 0.000s timeout 200s
> > /usr/bin/cdrecord: Input/output error. start/stop unit: scsi sendcmd:
> fatal
> > error
> > CDB: 1B 00 00 00 02 00
> > cmd finished after 0.000s timeout 200s
> > /usr/bin/cdrecord: Cannot eject media.
> > /usr/bin/cdrecord: fifo had 64 puts and 0 gets.
> > /usr/bin/cdrecord: fifo was 0 times empty and 0 times full, min fill was
> > 100%.
> >
> > cdrecord command:
> > -----------------------
> > /usr/bin/cdrecord -v gracetime=2 dev=/dev/sr0 speed=10 -dao
> > driveropts=burnfree -eject -data -tsize=335516s -
> >
> > mkisofs
> > -----------------------
> > 335516
> > 0.15% done, estimate finish Fri Dec 7 23:05:59 2007
> > 0.30% done, estimate finish Fri Dec 7 01:10:48 2007
> > 0.45% done, estimate finish Thu Dec 6 17:47:23 2007
> > 0.60% done, estimate finish Thu Dec 6 13:58:33 2007
> >
> > mkisofs calculate size command:
> > -----------------------
> > /usr/bin/mkisofs -gui -graft-points -print-size -quiet -volid DivX - ITA
> -
> > La Collina Dei Coni -volset -appid K3B THE CD KREATOR (C) 1998-2006
> > SEBASTIAN TRUEG AND THE K3B TEAM -publisher -preparer -sysid LINUX
> > -volset-size 1 -volset-seqno 1 -sort /tmp/kde-root/k3bjAPmXa.tmp
> > -rational-rock -hide-list /tmp/kde-root/k3bXiyemc.tmp -joliet
> -joliet-long
> > -hide-joliet-list /tmp/kde-root/k3bvmJ4ec.tmp -no-cache-inodes
> > -full-iso9660-filenames -iso-level 2 -path-list
> /tmp/kde-root/k3bO0Ky7b.tmp
> >
> > mkisofs command:
> > -----------------------
> > /usr/bin/mkisofs -gui -graft-points -volid DivX - ITA - La Collina Dei
> Coni
> > -volset -appid K3B THE CD KREATOR (C) 1998-2006 SEBASTIAN TRUEG AND THE
> > K3B TEAM -publisher -preparer -sysid LINUX -volset-size 1
> -volset-seqno 1
> > -sort /tmp/kde-root/k3bKT6j1b.tmp -rational-rock -hide-list
> > /tmp/kde-root/k3bekKHBa.tmp -joliet -joliet-long -hide-joliet-list
> > /tmp/kde-root/k3b5WvNqa.tmp -no-cache-inodes -full-iso9660-filenames
> > -iso-level 2 -path-list /tmp/kde-root/k3bHwny6b.tmp
> >
> > Il 06/12/07, andrea sabba <a.sabba a gmail.com> ha scritto:
> > > ok allora l'ultimo mio messaggio è inutile.
> > > riavvio e reimposto l e opzioni predefinite.
> > > cosa devo fare per mandarti i messaggi d'errore, non me li da, devo
> > > killare il programma, se no rimene attivo senza scrivere niente con le
> > > percentuali a 0 fino all'infinito.
> > > ciao e grazie.
> > >
> > > Il 06/12/07, andrea sabba <a.sabba a gmail.com> ha scritto:
> > > > cmq dopo il riavvio, ho provato a masterizzare da root con kdesu k3b
> > > > niente neanche così.
> > > > sono disperato.
> > > > ciao.
> > > >
> > > > Il 06/12/07, andrea sabba < a.sabba a gmail.com> ha scritto:
> > > > > ho provato ad inserire sulle opzioni di setup di k3b il gruppo
> > > > > "nopermfs", ma niente da fare, mi ritorna: "problema i/o non
> > > > > necessariamente grave", poi il programma non riconosce più il
> > > > > masterizzatore se non riavvio la macchina.
> > > > > ho provato a scrivere poi sul disco sata, niente neanche qui, nè
> con
> > > > > kdesu konkueror, nè con
> > > > > /sistema/altriprogrammi/filemanager-modalitàsuperutente",
> impossibile
> > > > > scrivere su /mnt/sata.
> > > > > non so più che fare ora provo a masterizzare da root.
> > > > > ciao, grazie.
> > > > >
> > > > > 2007/12/6, andrea sabba <a.sabba a gmail.com>:
> > > > > > allora ora studio un pochino, e poi provo.
> > > > > > grazie.
> > > > > >
> > > > > > 2007/12/5, Marco Bellezza < superbel a hotmail.it>:
> > > > > > > Prova a vedere se riesci a scrivere con i privilegi di root,
> io
> > > > > > > all'inizio così potevo sia sull'hard disk ke sul
> masterizzatore,
> > > > > > > però adesso il gruppo nopermfs ha i diritti di scrittura,
> quindi
> > > > > > > prova ad aggiungerlo al tuo utente...
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > ------------------------------
> > > > > > > Date: Wed, 5 Dec 2007 23:17:53 +0100
> > > > > > > From: a.sabba a gmail.com
> > > > > > > To: openmamba-users-it a openmamba.org
> > > > > > > Subject: [openmamba-users-it] Masterizzatore sata:
> > > > > > >
> > > > > > > salve,
> > > > > > > ho cambiato il masterizzatrore sul mio pc, installando un LG
> GSA
> > > > > > > H62N.
> > > > > > > non l'avessi mai fatto, non riesco più a masterizzare.
> > > > > > > ho provato cambiando il proprietario e i permessi di
> /dev/sr0,
> > > > > > > così come viene riconosciuto.
> > > > > > > non riesco lo stesso.
> > > > > > > non so più che fare
> > > > > > > devo modificare il file /etc/fstab?
> > > > > > > lì non viene elencato.
> > > > > > > non riesco a scrivere perché é sata, come l'hard-disk che lo
> > > > > > > vedo, lo leggo,
> > > > > > > avendo cambiato i permessi, ma non riesco a scriverci?
> > > > > > > se si come, per favore.
> > > > > > > grazie.
> > > > > > >
> > > > > > >
> > > > > > > ------------------------------
> > > > > > > Tutti i tuoi account di posta sul desktop..con Windows Live
> Mail!
> > > > > > > Windows Live Mail <http://www.windowslive.it>
>
>
>
> --
> mambaSoft di Silvan Calarco - http://www.mambasoft.it
> openmamba GNU/Linux development - http://www.openmamba.org
>
-------------- parte successiva --------------
Un allegato HTML è stato rimosso...
URL: http://tao/pipermail/openmamba-users-it/attachments/20071206/7f17eb12/attachment-0001.html
Maggiori informazioni sulla lista
openmamba-users-it