[openmamba-users-it] Masterizzatore sata:
Silvan Calarco
silvan.calarco a mambasoft.it
Gio 6 Dic 2007 03:40:15 CET
Ho mandato sul repository cdrkit, una versione più recente e forse meglio
mantenuta di cdrtools.
Quindi ti direi di installare cdrkit (richiede anche che aggiorni cdrtools) e
riprovare con k3b. Quest'ultimo si configurerà automaticamente per usare
cdrkit e lo puoi verificare notando che al programma cdrecord sarà associato
l'eseguibile /usr/bin/wodim.
A questo punto prova e se hai ancora problemi posta di nuovo il log,
altrimenti cdrkit diventa un buon candidato per sostituire cdrtools nella
distribuzione.
ciao,
Silvan
Alle giovedì 6 dicembre 2007, andrea sabba ha scritto:
> intendevi questo?
>
> System
> -----------------------
> K3b Version: 1.0.4
>
> KDE Version: 3.5.8
> QT Version: 3.3.8
> Kernel: 2.6.22mamba
> Devices
> -----------------------
> HL-DT-ST DVDRAM GSA-H62N CL00 (/dev/sr0, ) [CD-R, CD-RW, CD-ROM, DVD-ROM,
> DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL] [DVD-ROM, DVD-R
> sequenziale, DVD-R sequenziale a doppio strato, DVD-R jump a doppio strato,
> DVD-RAM, DVD-RW a riscrittura limitata, DVD-RW sequenziale, DVD+RW, DVD+R,
> DVD+R a doppio strato, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P,
> SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Riscrittura limitata, Livello Jump]
>
> SAMSUNG DVD-ROM SD-612S SS04 (/dev/hdb, ) [CD-ROM, DVD-ROM] [DVD-ROM,
> CD-ROM] [Nessuno]
> K3bIsoImager
> -----------------------
> mkisofs print size result: 335516 (687136768 bytes)
> Pipe throughput: 4192256 bytes read, 4176640 bytes written.
>
> Used versions
> -----------------------
> mkisofs: 2.1
> cdrecord: 2.1
>
> cdrecord
> -----------------------
> /usr/bin/cdrecord: Warning: Running on Linux-2.6.22mamba
> /usr/bin/cdrecord: There are unsettled issues with Linux-2.5 and newer.
> /usr/bin/cdrecord: If you have unexpected problems, please try Linux-2.4 or
> Solaris.
> scsidev: '/dev/sr0'
> devname: '/dev/sr0'
> scsibus: -2 target: -2 lun: -2
> Warning: Open by 'devname' is unintentional and not supported.
> Linux sg driver version: 3.5.27
> SCSI buffer size: 64512
> Cdrecord-Clone 2.01 (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg
> Schilling
> NOTE: this is OSS DVD extensions for cdrtools and thus may have bugs
> related to DVD issues that are not present in the original cdrtools. For
> more information see http://crashrecovery.org/oss-dvd.html. The original
> cdrtools author should not be bothered with problems in this version.
> TOC Type: 1 = CD-ROM
> Using libscg version 'schily-0.8'.
> Driveropts: 'burnfree'
> atapi: 1
> Device type : Removable CD-ROM
> Version : 5
> Response Format: 2
> Capabilities :
> Vendor_info : 'HL-DT-ST'
> Identifikation : 'DVDRAM GSA-H62N '
> Revision : 'CL00'
> Device seems to be: Generic mmc2 DVD-R/DVD-RW.
> Current: 0x000A
> Profile: 0x0012
> Profile: 0x0011
> Profile: 0x0015
> Profile: 0x0016
> Profile: 0x0014
> Profile: 0x0013
> Profile: 0x001A
> Profile: 0x001B
> Profile: 0x002B
> Profile: 0x0010
> Profile: 0x0009
> Profile: 0x000A (current)
> Profile: 0x0008
> Profile: 0x0002
> Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
> Driver flags : MMC-3 SWABAUDIO BURNFREE
> Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
> Drive buf size : 1053696 = 1029 KB
> Drive DMA Speed: 16800 kB/s 95x CD 12x DVD
> FIFO size : 4194304 = 4096 KB
> Track 01: data 655 MB
> Total size: 752 MB (74:33.54) = 335516 sectors
> Lout start: 752 MB (74:35/41) = 335516 sectors
> Current Secsize: 2048
> ATIP info from disk:
> Indicated writing power: 2
> Reference speed: 6
> Is not unrestricted
> Is erasable
> Disk sub type: High speed Rewritable (CAV) media (1)
> ATIP start of lead in: -11077 (97:34/23)
> ATIP start of lead out: 336075 (74:43/00)
> 1T speed low: 4 1T speed high: 10
> 2T speed low: 2 2T speed high: 10
> power mult factor: 2 6
> recommended erase/write power: 5
> A1 values: 24 2C DC
> A2 values: 14 A4 4A
> Disk type: Phase change
> Manuf. index: 11
> Manufacturer: Mitsubishi Chemical Corporation
> Blocks total: 336075 Blocks current: 336075 Blocks remaining: 559
> Starting to write CD/DVD at speed 10 in real SAO mode for single session.
> Last chance to quit, starting real write in 2 seconds.
> 1 seconds.
> 0 seconds. Operation starts.
> Waiting for reader process to fill input buffer ... input buffer ready.
> trackno=0
> BURN-Free is OFF.
> Turning BURN-Free on
> Performing OPC...
> Sending CUE sheet...
> /usr/bin/cdrecord: CUE sheet not accepted. Retrying with minimum pregapsize
> = 1.
> /usr/bin/cdrecord: Input/output error. send_cue_sheet: scsi sendcmd: no
> error
> CDB: 5D 00 00 00 00 00 00 00 20 00
> status: 0x2 (CHECK CONDITION)
> Sense Bytes: 70 00 05 00 00 00 00 0A 5D 34 02 90 26 00 00 00
> Sense Key: 0x5 Illegal Request, Segment 0
> Sense Code: 0x26 Qual 0x00 (invalid field in parameter list) Fru 0x0
> Sense flags: Blk 0 (not valid)
> cmd finished after 0.002s timeout 200s
> /usr/bin/cdrecord: CUE sheet still not accepted. Please try to write in RAW
> (-raw96r) mode.
> /usr/bin/cdrecord: Cannot send CUE sheet.
> /usr/bin/cdrecord: Could not write Lead-in.
> /usr/bin/cdrecord: faio_wait_on_buffer for writer timed out.
> /usr/bin/cdrecord: Input/output error. prevent/allow medium removal: scsi
> sendcmd: fatal error
> CDB: 1E 00 00 00 00 00
> cmd finished after 0.000s timeout 200s
> Writing time: 331.828s
> /usr/bin/cdrecord: Input/output error. start/stop unit: scsi sendcmd: fatal
> error
> CDB: 1B 00 00 00 02 00
> cmd finished after 0.000s timeout 200s
> /usr/bin/cdrecord: Cannot eject media.
> Track 01: data 655 MB
> Total size: 752 MB (74:33.54) = 335516 sectors
> Lout start: 752 MB (74:35/41) = 335516 sectors
> Current Secsize: 2048
> ATIP info from disk:
> Indicated writing power: 2
> Reference speed: 6
> Is not unrestricted
> Is erasable
> Disk sub type: High speed Rewritable (CAV) media (1)
> ATIP start of lead in: -11077 (97:34/23)
> ATIP start of lead out: 336075 (74:43/00)
> 1T speed low: 4 1T speed high: 10
> 2T speed low: 2 2T speed high: 10
> power mult factor: 2 6
> recommended erase/write power: 5
> A1 values: 24 2C DC
> A2 values: 14 A4 4A
> Disk type: Phase change
> Manuf. index: 11
> Manufacturer: Mitsubishi Chemical Corporation
> Blocks total: 336075 Blocks current: 336075 Blocks remaining: 559
> /usr/bin/cdrecord: Input/output error. prevent/allow medium removal: scsi
> sendcmd: fatal error
> CDB: 1E 00 00 00 00 00
> cmd finished after 0.000s timeout 200s
> /usr/bin/cdrecord: Input/output error. start/stop unit: scsi sendcmd: fatal
> error
> CDB: 1B 00 00 00 02 00
> cmd finished after 0.000s timeout 200s
> /usr/bin/cdrecord: Cannot eject media.
> /usr/bin/cdrecord: fifo had 64 puts and 0 gets.
> /usr/bin/cdrecord: fifo was 0 times empty and 0 times full, min fill was
> 100%.
>
> cdrecord command:
> -----------------------
> /usr/bin/cdrecord -v gracetime=2 dev=/dev/sr0 speed=10 -dao
> driveropts=burnfree -eject -data -tsize=335516s -
>
> mkisofs
> -----------------------
> 335516
> 0.15% done, estimate finish Fri Dec 7 23:05:59 2007
> 0.30% done, estimate finish Fri Dec 7 01:10:48 2007
> 0.45% done, estimate finish Thu Dec 6 17:47:23 2007
> 0.60% done, estimate finish Thu Dec 6 13:58:33 2007
>
> mkisofs calculate size command:
> -----------------------
> /usr/bin/mkisofs -gui -graft-points -print-size -quiet -volid DivX - ITA -
> La Collina Dei Coni -volset -appid K3B THE CD KREATOR (C) 1998-2006
> SEBASTIAN TRUEG AND THE K3B TEAM -publisher -preparer -sysid LINUX
> -volset-size 1 -volset-seqno 1 -sort /tmp/kde-root/k3bjAPmXa.tmp
> -rational-rock -hide-list /tmp/kde-root/k3bXiyemc.tmp -joliet -joliet-long
> -hide-joliet-list /tmp/kde-root/k3bvmJ4ec.tmp -no-cache-inodes
> -full-iso9660-filenames -iso-level 2 -path-list /tmp/kde-root/k3bO0Ky7b.tmp
>
> mkisofs command:
> -----------------------
> /usr/bin/mkisofs -gui -graft-points -volid DivX - ITA - La Collina Dei Coni
> -volset -appid K3B THE CD KREATOR (C) 1998-2006 SEBASTIAN TRUEG AND THE
> K3B TEAM -publisher -preparer -sysid LINUX -volset-size 1 -volset-seqno 1
> -sort /tmp/kde-root/k3bKT6j1b.tmp -rational-rock -hide-list
> /tmp/kde-root/k3bekKHBa.tmp -joliet -joliet-long -hide-joliet-list
> /tmp/kde-root/k3b5WvNqa.tmp -no-cache-inodes -full-iso9660-filenames
> -iso-level 2 -path-list /tmp/kde-root/k3bHwny6b.tmp
>
> Il 06/12/07, andrea sabba <a.sabba a gmail.com> ha scritto:
> > ok allora l'ultimo mio messaggio è inutile.
> > riavvio e reimposto l e opzioni predefinite.
> > cosa devo fare per mandarti i messaggi d'errore, non me li da, devo
> > killare il programma, se no rimene attivo senza scrivere niente con le
> > percentuali a 0 fino all'infinito.
> > ciao e grazie.
> >
> > Il 06/12/07, andrea sabba <a.sabba a gmail.com> ha scritto:
> > > cmq dopo il riavvio, ho provato a masterizzare da root con kdesu k3b
> > > niente neanche così.
> > > sono disperato.
> > > ciao.
> > >
> > > Il 06/12/07, andrea sabba < a.sabba a gmail.com> ha scritto:
> > > > ho provato ad inserire sulle opzioni di setup di k3b il gruppo
> > > > "nopermfs", ma niente da fare, mi ritorna: "problema i/o non
> > > > necessariamente grave", poi il programma non riconosce più il
> > > > masterizzatore se non riavvio la macchina.
> > > > ho provato a scrivere poi sul disco sata, niente neanche qui, nè con
> > > > kdesu konkueror, nè con
> > > > /sistema/altriprogrammi/filemanager-modalitàsuperutente", impossibile
> > > > scrivere su /mnt/sata.
> > > > non so più che fare ora provo a masterizzare da root.
> > > > ciao, grazie.
> > > >
> > > > 2007/12/6, andrea sabba <a.sabba a gmail.com>:
> > > > > allora ora studio un pochino, e poi provo.
> > > > > grazie.
> > > > >
> > > > > 2007/12/5, Marco Bellezza < superbel a hotmail.it>:
> > > > > > Prova a vedere se riesci a scrivere con i privilegi di root, io
> > > > > > all'inizio così potevo sia sull'hard disk ke sul masterizzatore,
> > > > > > però adesso il gruppo nopermfs ha i diritti di scrittura, quindi
> > > > > > prova ad aggiungerlo al tuo utente...
> > > > > >
> > > > > >
> > > > > >
> > > > > > ------------------------------
> > > > > > Date: Wed, 5 Dec 2007 23:17:53 +0100
> > > > > > From: a.sabba a gmail.com
> > > > > > To: openmamba-users-it a openmamba.org
> > > > > > Subject: [openmamba-users-it] Masterizzatore sata:
> > > > > >
> > > > > > salve,
> > > > > > ho cambiato il masterizzatrore sul mio pc, installando un LG GSA
> > > > > > H62N.
> > > > > > non l'avessi mai fatto, non riesco più a masterizzare.
> > > > > > ho provato cambiando il proprietario e i permessi di /dev/sr0,
> > > > > > così come viene riconosciuto.
> > > > > > non riesco lo stesso.
> > > > > > non so più che fare
> > > > > > devo modificare il file /etc/fstab?
> > > > > > lì non viene elencato.
> > > > > > non riesco a scrivere perché é sata, come l'hard-disk che lo
> > > > > > vedo, lo leggo,
> > > > > > avendo cambiato i permessi, ma non riesco a scriverci?
> > > > > > se si come, per favore.
> > > > > > grazie.
> > > > > >
> > > > > >
> > > > > > ------------------------------
> > > > > > Tutti i tuoi account di posta sul desktop..con Windows Live Mail!
> > > > > > Windows Live Mail <http://www.windowslive.it>
--
mambaSoft di Silvan Calarco - http://www.mambasoft.it
openmamba GNU/Linux development - http://www.openmamba.org
Maggiori informazioni sulla lista
openmamba-users-it