[openmamba-users-it] Masterizzatore sata:
andrea sabba
a.sabba a gmail.com
Gio 6 Dic 2007 02:51:22 CET
intendevi questo?
System
-----------------------
K3b Version: 1.0.4
KDE Version: 3.5.8
QT Version: 3.3.8
Kernel: 2.6.22mamba
Devices
-----------------------
HL-DT-ST DVDRAM GSA-H62N CL00 (/dev/sr0, ) [CD-R, CD-RW, CD-ROM, DVD-ROM,
DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL] [DVD-ROM, DVD-R
sequenziale, DVD-R sequenziale a doppio strato, DVD-R jump a doppio strato,
DVD-RAM, DVD-RW a riscrittura limitata, DVD-RW sequenziale, DVD+RW, DVD+R,
DVD+R a doppio strato, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P,
SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Riscrittura limitata, Livello Jump]
SAMSUNG DVD-ROM SD-612S SS04 (/dev/hdb, ) [CD-ROM, DVD-ROM] [DVD-ROM,
CD-ROM] [Nessuno]
K3bIsoImager
-----------------------
mkisofs print size result: 335516 (687136768 bytes)
Pipe throughput: 4192256 bytes read, 4176640 bytes written.
Used versions
-----------------------
mkisofs: 2.1
cdrecord: 2.1
cdrecord
-----------------------
/usr/bin/cdrecord: Warning: Running on Linux-2.6.22mamba
/usr/bin/cdrecord: There are unsettled issues with Linux-2.5 and newer.
/usr/bin/cdrecord: If you have unexpected problems, please try Linux-2.4 or
Solaris.
scsidev: '/dev/sr0'
devname: '/dev/sr0'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version: 3.5.27
SCSI buffer size: 64512
Cdrecord-Clone 2.01 (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg
Schilling
NOTE: this is OSS DVD extensions for cdrtools and thus may have bugs
related to DVD issues that are not present in the original cdrtools. For
more information see http://crashrecovery.org/oss-dvd.html. The original
cdrtools author should not be bothered with problems in this version.
TOC Type: 1 = CD-ROM
Using libscg version 'schily-0.8'.
Driveropts: 'burnfree'
atapi: 1
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'HL-DT-ST'
Identifikation : 'DVDRAM GSA-H62N '
Revision : 'CL00'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x000A
Profile: 0x0012
Profile: 0x0011
Profile: 0x0015
Profile: 0x0016
Profile: 0x0014
Profile: 0x0013
Profile: 0x001A
Profile: 0x001B
Profile: 0x002B
Profile: 0x0010
Profile: 0x0009
Profile: 0x000A (current)
Profile: 0x0008
Profile: 0x0002
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1053696 = 1029 KB
Drive DMA Speed: 16800 kB/s 95x CD 12x DVD
FIFO size : 4194304 = 4096 KB
Track 01: data 655 MB
Total size: 752 MB (74:33.54) = 335516 sectors
Lout start: 752 MB (74:35/41) = 335516 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 2
Reference speed: 6
Is not unrestricted
Is erasable
Disk sub type: High speed Rewritable (CAV) media (1)
ATIP start of lead in: -11077 (97:34/23)
ATIP start of lead out: 336075 (74:43/00)
1T speed low: 4 1T speed high: 10
2T speed low: 2 2T speed high: 10
power mult factor: 2 6
recommended erase/write power: 5
A1 values: 24 2C DC
A2 values: 14 A4 4A
Disk type: Phase change
Manuf. index: 11
Manufacturer: Mitsubishi Chemical Corporation
Blocks total: 336075 Blocks current: 336075 Blocks remaining: 559
Starting to write CD/DVD at speed 10 in real SAO mode for single session.
Last chance to quit, starting real write in 2 seconds.
1 seconds.
0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
trackno=0
BURN-Free is OFF.
Turning BURN-Free on
Performing OPC...
Sending CUE sheet...
/usr/bin/cdrecord: CUE sheet not accepted. Retrying with minimum pregapsize
= 1.
/usr/bin/cdrecord: Input/output error. send_cue_sheet: scsi sendcmd: no
error
CDB: 5D 00 00 00 00 00 00 00 20 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 5D 34 02 90 26 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x26 Qual 0x00 (invalid field in parameter list) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.002s timeout 200s
/usr/bin/cdrecord: CUE sheet still not accepted. Please try to write in RAW
(-raw96r) mode.
/usr/bin/cdrecord: Cannot send CUE sheet.
/usr/bin/cdrecord: Could not write Lead-in.
/usr/bin/cdrecord: faio_wait_on_buffer for writer timed out.
/usr/bin/cdrecord: Input/output error. prevent/allow medium removal: scsi
sendcmd: fatal error
CDB: 1E 00 00 00 00 00
cmd finished after 0.000s timeout 200s
Writing time: 331.828s
/usr/bin/cdrecord: Input/output error. start/stop unit: scsi sendcmd: fatal
error
CDB: 1B 00 00 00 02 00
cmd finished after 0.000s timeout 200s
/usr/bin/cdrecord: Cannot eject media.
Track 01: data 655 MB
Total size: 752 MB (74:33.54) = 335516 sectors
Lout start: 752 MB (74:35/41) = 335516 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 2
Reference speed: 6
Is not unrestricted
Is erasable
Disk sub type: High speed Rewritable (CAV) media (1)
ATIP start of lead in: -11077 (97:34/23)
ATIP start of lead out: 336075 (74:43/00)
1T speed low: 4 1T speed high: 10
2T speed low: 2 2T speed high: 10
power mult factor: 2 6
recommended erase/write power: 5
A1 values: 24 2C DC
A2 values: 14 A4 4A
Disk type: Phase change
Manuf. index: 11
Manufacturer: Mitsubishi Chemical Corporation
Blocks total: 336075 Blocks current: 336075 Blocks remaining: 559
/usr/bin/cdrecord: Input/output error. prevent/allow medium removal: scsi
sendcmd: fatal error
CDB: 1E 00 00 00 00 00
cmd finished after 0.000s timeout 200s
/usr/bin/cdrecord: Input/output error. start/stop unit: scsi sendcmd: fatal
error
CDB: 1B 00 00 00 02 00
cmd finished after 0.000s timeout 200s
/usr/bin/cdrecord: Cannot eject media.
/usr/bin/cdrecord: fifo had 64 puts and 0 gets.
/usr/bin/cdrecord: fifo was 0 times empty and 0 times full, min fill was
100%.
cdrecord command:
-----------------------
/usr/bin/cdrecord -v gracetime=2 dev=/dev/sr0 speed=10 -dao
driveropts=burnfree -eject -data -tsize=335516s -
mkisofs
-----------------------
335516
0.15% done, estimate finish Fri Dec 7 23:05:59 2007
0.30% done, estimate finish Fri Dec 7 01:10:48 2007
0.45% done, estimate finish Thu Dec 6 17:47:23 2007
0.60% done, estimate finish Thu Dec 6 13:58:33 2007
mkisofs calculate size command:
-----------------------
/usr/bin/mkisofs -gui -graft-points -print-size -quiet -volid DivX - ITA -
La Collina Dei Coni -volset -appid K3B THE CD KREATOR (C) 1998-2006
SEBASTIAN TRUEG AND THE K3B TEAM -publisher -preparer -sysid LINUX
-volset-size 1 -volset-seqno 1 -sort /tmp/kde-root/k3bjAPmXa.tmp
-rational-rock -hide-list /tmp/kde-root/k3bXiyemc.tmp -joliet -joliet-long
-hide-joliet-list /tmp/kde-root/k3bvmJ4ec.tmp -no-cache-inodes
-full-iso9660-filenames -iso-level 2 -path-list /tmp/kde-root/k3bO0Ky7b.tmp
mkisofs command:
-----------------------
/usr/bin/mkisofs -gui -graft-points -volid DivX - ITA - La Collina Dei Coni
-volset -appid K3B THE CD KREATOR (C) 1998-2006 SEBASTIAN TRUEG AND THE K3B
TEAM -publisher -preparer -sysid LINUX -volset-size 1 -volset-seqno 1
-sort /tmp/kde-root/k3bKT6j1b.tmp -rational-rock -hide-list
/tmp/kde-root/k3bekKHBa.tmp -joliet -joliet-long -hide-joliet-list
/tmp/kde-root/k3b5WvNqa.tmp -no-cache-inodes -full-iso9660-filenames
-iso-level 2 -path-list /tmp/kde-root/k3bHwny6b.tmp
Il 06/12/07, andrea sabba <a.sabba a gmail.com> ha scritto:
>
> ok allora l'ultimo mio messaggio è inutile.
> riavvio e reimposto l e opzioni predefinite.
> cosa devo fare per mandarti i messaggi d'errore, non me li da, devo
> killare il programma, se no rimene attivo senza scrivere niente con le
> percentuali a 0 fino all'infinito.
> ciao e grazie.
>
> Il 06/12/07, andrea sabba <a.sabba a gmail.com> ha scritto:
> >
> > cmq dopo il riavvio, ho provato a masterizzare da root con kdesu k3b
> > niente neanche così.
> > sono disperato.
> > ciao.
> >
> > Il 06/12/07, andrea sabba < a.sabba a gmail.com> ha scritto:
> > >
> > > ho provato ad inserire sulle opzioni di setup di k3b il gruppo
> > > "nopermfs", ma niente da fare, mi ritorna: "problema i/o non necessariamente
> > > grave", poi il programma non riconosce più il masterizzatore se non riavvio
> > > la macchina.
> > > ho provato a scrivere poi sul disco sata, niente neanche qui, nè con
> > > kdesu konkueror, nè con
> > > /sistema/altriprogrammi/filemanager-modalitàsuperutente", impossibile
> > > scrivere su /mnt/sata.
> > > non so più che fare ora provo a masterizzare da root.
> > > ciao, grazie.
> > >
> > >
> > > 2007/12/6, andrea sabba <a.sabba a gmail.com>:
> > > >
> > > > allora ora studio un pochino, e poi provo.
> > > > grazie.
> > > >
> > > > 2007/12/5, Marco Bellezza < superbel a hotmail.it>:
> > > > >
> > > > > Prova a vedere se riesci a scrivere con i privilegi di root, io
> > > > > all'inizio così potevo sia sull'hard disk ke sul masterizzatore, però adesso
> > > > > il gruppo nopermfs ha i diritti di scrittura, quindi prova ad aggiungerlo al
> > > > > tuo utente...
> > > > >
> > > > >
> > > > >
> > > > > ------------------------------
> > > > > Date: Wed, 5 Dec 2007 23:17:53 +0100
> > > > > From: a.sabba a gmail.com
> > > > > To: openmamba-users-it a openmamba.org
> > > > > Subject: [openmamba-users-it] Masterizzatore sata:
> > > > >
> > > > > salve,
> > > > > ho cambiato il masterizzatrore sul mio pc, installando un LG GSA
> > > > > H62N.
> > > > > non l'avessi mai fatto, non riesco più a masterizzare.
> > > > > ho provato cambiando il proprietario e i permessi di /dev/sr0,
> > > > > così come viene riconosciuto.
> > > > > non riesco lo stesso.
> > > > > non so più che fare
> > > > > devo modificare il file /etc/fstab?
> > > > > lì non viene elencato.
> > > > > non riesco a scrivere perché é sata, come l'hard-disk che lo vedo,
> > > > > lo leggo,
> > > > > avendo cambiato i permessi, ma non riesco a scriverci?
> > > > > se si come, per favore.
> > > > > grazie.
> > > > >
> > > > >
> > > > > ------------------------------
> > > > > Tutti i tuoi account di posta sul desktop..con Windows Live Mail! Windows
> > > > > Live Mail <http://www.windowslive.it>
> > > > >
> > > >
> > > >
> > >
> >
>
-------------- parte successiva --------------
Un allegato HTML è stato rimosso...
URL: http://tao/pipermail/openmamba-users-it/attachments/20071206/1424d7e6/attachment-0001.html
Maggiori informazioni sulla lista
openmamba-users-it