checkFluidSystem.hpp

Go to the documentation of this file.

// -*- mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*-
// vi: set et ts=4 sw=4 sts=4:
/*
  This file is part of the Open Porous Media project (OPM).
 
  OPM is free software: you can redistribute it and/or modify
  it under the terms of the GNU General Public License as published by
  the Free Software Foundation, either version 2 of the License, or
  (at your option) any later version.
 
  OPM is distributed in the hope that it will be useful,
  but WITHOUT ANY WARRANTY; without even the implied warranty of
  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  GNU General Public License for more details.
 
  You should have received a copy of the GNU General Public License
  along with OPM.  If not, see <http://www.gnu.org/licenses/>.
 
  Consult the COPYING file in the top-level source directory of this
  module for the precise wording of the license and the list of
  copyright holders.
*/
#ifndef OPM_CHECK_FLUIDSYSTEM_HPP
#define OPM_CHECK_FLUIDSYSTEM_HPP
 
#include <opm/common/utility/DemangledType.hpp>
 
// include all fluid systems in opm-material
#include <opm/material/fluidsystems/SinglePhaseFluidSystem.hpp>
#include <opm/material/fluidsystems/TwoPhaseImmiscibleFluidSystem.hpp>
#include <opm/material/fluidsystems/H2ON2FluidSystem.hpp>
#include <opm/material/fluidsystems/H2ON2LiquidPhaseFluidSystem.hpp>
#include <opm/material/fluidsystems/H2OAirFluidSystem.hpp>
#include <opm/material/fluidsystems/H2OAirMesityleneFluidSystem.hpp>
#include <opm/material/fluidsystems/H2OAirXyleneFluidSystem.hpp>
#include <opm/material/fluidsystems/Spe5FluidSystem.hpp>
#include <opm/material/fluidsystems/PTFlashParameterCache.hpp>
#include <opm/input/eclipse/EclipseState/Compositional/CompositionalConfig.hpp>
 
// include all fluid states
#include <opm/material/fluidstates/PressureOverlayFluidState.hpp>
#include <opm/material/fluidstates/SaturationOverlayFluidState.hpp>
#include <opm/material/fluidstates/TemperatureOverlayFluidState.hpp>
#include <opm/material/fluidstates/CompositionalFluidState.hpp>
#include <opm/material/fluidstates/NonEquilibriumFluidState.hpp>
#include <opm/material/fluidstates/ImmiscibleFluidState.hpp>
 
#include <iostream>
#include <string>
#include <tuple>

template <class ScalarT,
          class FluidSystem,
          class BaseFluidState = Opm::CompositionalFluidState<ScalarT, FluidSystem> >
class HairSplittingFluidState
    : protected BaseFluidState
{
public:
    static constexpr int numPhases = FluidSystem::numPhases;
    static constexpr int numComponents = FluidSystem::numComponents;
 
    typedef ScalarT Scalar;
 
    HairSplittingFluidState()
    {
        // initially, do not allow anything
        allowTemperature(false);
        allowPressure(false);
        allowComposition(false);
        allowDensity(false);
 
        // do not allow accessing any phase
        restrictToPhase(1000);
    }
 
    void allowTemperature(bool yesno)
    { allowTemperature_ = yesno; }
 
    void allowPressure(bool yesno)
    { allowPressure_ = yesno; }
 
    void allowComposition(bool yesno)
    { allowComposition_ = yesno; }
 
    void allowDensity(bool yesno)
    { allowDensity_ = yesno; }
 
    void restrictToPhase(int phaseIdx)
    { restrictPhaseIdx_ = phaseIdx; }
 
    BaseFluidState& base()
    { return *static_cast<BaseFluidState*>(this); }
 
    const BaseFluidState& base() const
    { return *static_cast<const BaseFluidState*>(this); }
 
    auto temperature(unsigned phaseIdx) const
        -> decltype(this->base().temperature(phaseIdx))
    {
        assert(allowTemperature_);
        assert(restrictPhaseIdx_ < 0 || restrictPhaseIdx_ == static_cast<int>(phaseIdx));
        return this->base().temperature(phaseIdx);
    }
 
    auto pressure(unsigned phaseIdx) const
        -> decltype(this->base().pressure(phaseIdx))
    {
        assert(allowPressure_);
        assert(restrictPhaseIdx_ < 0 || restrictPhaseIdx_ == static_cast<int>(phaseIdx));
        return this->base().pressure(phaseIdx);
    }
 
    auto moleFraction(unsigned phaseIdx, unsigned compIdx) const
        -> decltype(this->base().moleFraction(phaseIdx, compIdx))
    {
        assert(allowComposition_);
        assert(restrictPhaseIdx_ < 0 || restrictPhaseIdx_ == static_cast<int>(phaseIdx));
        return this->base().moleFraction(phaseIdx, compIdx);
    }
 
    auto massFraction(unsigned phaseIdx, unsigned compIdx) const
        -> decltype(this->base().massFraction(phaseIdx, compIdx))
    {
        assert(allowComposition_);
        assert(restrictPhaseIdx_ < 0 || restrictPhaseIdx_ == static_cast<int>(phaseIdx));
        return this->base().massFraction(phaseIdx, compIdx);
    }
 
    auto averageMolarMass(unsigned phaseIdx) const
        -> decltype(this->base().averageMolarMass(phaseIdx))
    {
        assert(allowComposition_);
        assert(restrictPhaseIdx_ < 0 || restrictPhaseIdx_ == static_cast<int>(phaseIdx));
        return this->base().averageMolarMass(phaseIdx);
    }
 
    auto molarity(unsigned phaseIdx, unsigned compIdx) const
        -> decltype(this->base().molarity(phaseIdx, compIdx))
    {
        assert(allowDensity_ && allowComposition_);
        assert(restrictPhaseIdx_ < 0 || restrictPhaseIdx_ == static_cast<int>(phaseIdx));
        return this->base().molarity(phaseIdx, compIdx);
    }
 
    auto molarDensity(unsigned phaseIdx) const
        -> decltype(this->base().molarDensity(phaseIdx))
    {
        assert(allowDensity_);
        assert(restrictPhaseIdx_ < 0 || restrictPhaseIdx_ == static_cast<int>(phaseIdx));
        return this->base().molarDensity(phaseIdx);
    }
 
    auto molarVolume(unsigned phaseIdx) const
        -> decltype(this->base().molarVolume(phaseIdx))
    {
        assert(allowDensity_);
        assert(restrictPhaseIdx_ < 0 || restrictPhaseIdx_ == static_cast<int>(phaseIdx));
        return this->base().molarVolume(phaseIdx);
    }
 
    auto density(unsigned phaseIdx) const
        -> decltype(this->base().density(phaseIdx))
    {
        assert(allowDensity_);
        assert(restrictPhaseIdx_ < 0 || restrictPhaseIdx_ == static_cast<int>(phaseIdx));
        return this->base().density(phaseIdx);
    }
 
    auto saturation(unsigned phaseIdx) const
        -> decltype(this->base().saturation(phaseIdx))
    {
        assert(false);
        return  this->base().saturation(phaseIdx);
    }
 
    auto fugacity(unsigned phaseIdx, unsigned compIdx) const
        -> decltype(this->base().fugacity(phaseIdx, compIdx))
    {
        assert(false);
        return this->base().fugacity(phaseIdx, compIdx);
    }
 
    auto fugacityCoefficient(unsigned phaseIdx, unsigned compIdx) const
        -> decltype(this->base().fugacityCoefficient(phaseIdx, compIdx))
    {
        assert(false);
        return this->base().fugacityCoefficient(phaseIdx, compIdx);
    }
 
    auto enthalpy(unsigned phaseIdx) const
        -> decltype(this->base().enthalpy(phaseIdx))
    {
        assert(false);
        return this->base().enthalpy(phaseIdx);
    }
 
    auto internalEnergy(unsigned phaseIdx) const
        -> decltype(this->base().internalEnergy(phaseIdx))
    {
        assert(false);
        return this->base().internalEnergy(phaseIdx);
    }
 
    auto viscosity(unsigned phaseIdx) const
        -> decltype(this->base().viscosity(phaseIdx))
    {
        assert(false);
        return this->base().viscosity(phaseIdx);
    }
 
    auto compressFactor(unsigned phaseIdx) const
        -> decltype(this->base().compressFactor(phaseIdx))
    {
        return this->base().compressFactor(phaseIdx);
    }
 
private:
    bool allowSaturation_{false};
    bool allowTemperature_{false};
    bool allowPressure_{false};
    bool allowComposition_{false};
    bool allowDensity_{false};
    int restrictPhaseIdx_{};
};
 
template <class Scalar, class BaseFluidState>
void checkFluidState(const BaseFluidState& fs)
{
    // fluid states must be copy-able
    [[maybe_unused]] BaseFluidState tmpFs(fs);
    tmpFs = fs;
 
    // a fluid state must provide a checkDefined() method
    fs.checkDefined();
 
    // fluid states must export the types which they use as Scalars
    typedef typename BaseFluidState::Scalar FsScalar;
    static_assert(std::is_same<FsScalar, Scalar>::value,
                  "Fluid states must export the type they are given as scalar in an unmodified way");
 
    // make sure the fluid state provides all mandatory methods
    while (false) {
        std::ignore = fs.temperature(/*phaseIdx=*/0);
        std::ignore = fs.pressure(/*phaseIdx=*/0);
        std::ignore = fs.moleFraction(/*phaseIdx=*/0, /*compIdx=*/0);
        std::ignore = fs.massFraction(/*phaseIdx=*/0, /*compIdx=*/0);
        std::ignore = fs.averageMolarMass(/*phaseIdx=*/0);
        std::ignore = fs.molarity(/*phaseIdx=*/0, /*compIdx=*/0);
        std::ignore = fs.molarDensity(/*phaseIdx=*/0);
        std::ignore = fs.molarVolume(/*phaseIdx=*/0);
        std::ignore = fs.density(/*phaseIdx=*/0);
        std::ignore = fs.saturation(/*phaseIdx=*/0);
        std::ignore = fs.fugacity(/*phaseIdx=*/0, /*compIdx=*/0);
        std::ignore = fs.fugacityCoefficient(/*phaseIdx=*/0, /*compIdx=*/0);
        // Note that we will no longer require that a fluid system
        // supports enthalpy and internalEnergy compile time.
        // The commented-out checks below only confirmed that there
        // was a function that could be compiled, not that it actually
        // made sense (usually empty but throwing functions).
        // It is better to make such things compile errors rather than
        // runtime errors.
        // std::ignore = fs.enthalpy(/*phaseIdx=*/0);
        // std::ignore = fs.internalEnergy(/*phaseIdx=*/0);
        std::ignore = fs.viscosity(/*phaseIdx=*/0);
    };
}
 
template<typename ParameterCache, class Scalar, class FluidSystem>
ParameterCache initParamCache()
{
    constexpr bool is_same = std::is_same<ParameterCache, Opm::PTFlashParameterCache<Scalar, FluidSystem>>::value;
    if constexpr (is_same) {
        using EOSType = Opm::CompositionalConfig::EOSType;
        ParameterCache paramCache(EOSType::PR);
        return paramCache;
    }
    else {
        ParameterCache paramCache;
        return paramCache;
    }
}

template <class Scalar, class FluidSystem, class RhsEval, class LhsEval>
void checkFluidSystem()
{
    std::cout << "Testing fluid system '"
              << Opm::getDemangledType<FluidSystem>()
              << ", RhsEval = " << Opm::getDemangledType<RhsEval>()
              << ", LhsEval = " << Opm::getDemangledType<LhsEval>() << "'\n";
 
    // make sure the fluid system provides the number of phases and
    // the number of components
    static constexpr int numPhases = FluidSystem::numPhases;
    static constexpr int numComponents = FluidSystem::numComponents;
 
    typedef HairSplittingFluidState<RhsEval, FluidSystem> FluidState;
    FluidState fs;
    fs.allowTemperature(true);
    fs.allowPressure(true);
    fs.allowComposition(true);
    fs.restrictToPhase(-1);
 
    // initialize memory the fluid state
    fs.base().setTemperature(273.15 + 20.0);
    for (int phaseIdx = 0; phaseIdx < numPhases; ++ phaseIdx) {
        fs.base().setPressure(phaseIdx, 1e5);
        fs.base().setSaturation(phaseIdx, 1.0/numPhases);
        for (int compIdx = 0; compIdx < numComponents; ++ compIdx) {
            fs.base().setMoleFraction(phaseIdx, compIdx, 1.0/numComponents);
        }
    }
 
    static_assert(std::is_same<typename FluidSystem::Scalar, Scalar>::value,
                  "The type used for floating point used by the fluid system must be the same"
                  " as the one passed to the checkFluidSystem() function");
 
    // check whether the parameter cache adheres to the API
    typedef typename FluidSystem::template ParameterCache<LhsEval> ParameterCache;
 
    ParameterCache paramCache = initParamCache<ParameterCache, LhsEval, FluidSystem>();
    try { paramCache.updateAll(fs); } catch (...) {};
    try { paramCache.updateAll(fs, /*except=*/ParameterCache::None); } catch (...) {};
    try { paramCache.updateAll(fs, /*except=*/ParameterCache::Temperature | ParameterCache::Pressure | ParameterCache::Composition); } catch (...) {};
    try { paramCache.updateAllPressures(fs); } catch (...) {};
 
    for (unsigned phaseIdx = 0; phaseIdx < numPhases; ++phaseIdx) {
        fs.restrictToPhase(static_cast<int>(phaseIdx));
        try { paramCache.updatePhase(fs, phaseIdx); } catch (...) {};
        try { paramCache.updatePhase(fs, phaseIdx, /*except=*/ParameterCache::None); } catch (...) {};
        try { paramCache.updatePhase(fs, phaseIdx, /*except=*/ParameterCache::Temperature | ParameterCache::Pressure | ParameterCache::Composition); } catch (...) {};
        try { paramCache.updateTemperature(fs, phaseIdx); } catch (...) {};
        try { paramCache.updatePressure(fs, phaseIdx); } catch (...) {};
        try { paramCache.updateComposition(fs, phaseIdx); } catch (...) {};
        try { paramCache.updateSingleMoleFraction(fs, phaseIdx, /*compIdx=*/0); } catch (...) {};
    }
 
    // some value to make sure the return values of the fluid system
    // are convertible to scalars
    LhsEval val = 0.0;
    Scalar scalarVal = 0.0;
 
    scalarVal = 2*scalarVal; // get rid of GCC warning (only occurs with paranoid warning flags)
    val = 2*val; // get rid of GCC warning (only occurs with paranoid warning flags)
 
    // actually check the fluid system API
    try { FluidSystem::init(); } catch (...) {};
    for (unsigned phaseIdx = 0; phaseIdx < numPhases; ++ phaseIdx) {
        fs.restrictToPhase(static_cast<int>(phaseIdx));
        fs.allowPressure(FluidSystem::isCompressible(phaseIdx));
        fs.allowComposition(true);
        fs.allowDensity(false);
        try { [[maybe_unused]] auto tmpVal = FluidSystem::density(fs, paramCache, phaseIdx); static_assert(std::is_same<decltype(tmpVal), RhsEval>::value, "The default return value must be the scalar used by the fluid state!"); } catch (...) {};
        try { val = FluidSystem::template density<FluidState, LhsEval>(fs, paramCache, phaseIdx); } catch (...) {};
        try { scalarVal = FluidSystem::template density<FluidState, Scalar>(fs, paramCache, phaseIdx); } catch (...) {};
 
        fs.allowPressure(true);
        fs.allowDensity(true);
        try { [[maybe_unused]] auto tmpVal = FluidSystem::viscosity(fs, paramCache, phaseIdx); static_assert(std::is_same<decltype(tmpVal), RhsEval>::value, "The default return value must be the scalar used by the fluid state!"); } catch (...) {};
        try { [[maybe_unused]] auto tmpVal = FluidSystem::enthalpy(fs, paramCache, phaseIdx); static_assert(std::is_same<decltype(tmpVal), RhsEval>::value, "The default return value must be the scalar used by the fluid state!"); } catch (...) {};
        try { [[maybe_unused]] auto tmpVal = FluidSystem::heatCapacity(fs, paramCache, phaseIdx); static_assert(std::is_same<decltype(tmpVal), RhsEval>::value, "The default return value must be the scalar used by the fluid state!"); } catch (...) {};
        try { [[maybe_unused]] auto tmpVal = FluidSystem::thermalConductivity(fs, paramCache, phaseIdx); static_assert(std::is_same<decltype(tmpVal), RhsEval>::value, "The default return value must be the scalar used by the fluid state!"); } catch (...) {};
        try { val = FluidSystem::template viscosity<FluidState, LhsEval>(fs, paramCache, phaseIdx); } catch (...) {};
        try { val = FluidSystem::template enthalpy<FluidState, LhsEval>(fs, paramCache, phaseIdx); } catch (...) {};
        try { val = FluidSystem::template heatCapacity<FluidState, LhsEval>(fs, paramCache, phaseIdx); } catch (...) {};
        try { val = FluidSystem::template thermalConductivity<FluidState, LhsEval>(fs, paramCache, phaseIdx); } catch (...) {};
        try { scalarVal = FluidSystem::template viscosity<FluidState, Scalar>(fs, paramCache, phaseIdx); } catch (...) {};
        try { scalarVal = FluidSystem::template enthalpy<FluidState, Scalar>(fs, paramCache, phaseIdx); } catch (...) {};
        try { scalarVal = FluidSystem::template heatCapacity<FluidState, Scalar>(fs, paramCache, phaseIdx); } catch (...) {};
        try { scalarVal = FluidSystem::template thermalConductivity<FluidState, Scalar>(fs, paramCache, phaseIdx); } catch (...) {};
 
        for (unsigned compIdx = 0; compIdx < numComponents; ++ compIdx) {
            fs.allowComposition(!FluidSystem::isIdealMixture(phaseIdx));
            try { [[maybe_unused]] auto tmpVal = FluidSystem::fugacityCoefficient(fs, paramCache, phaseIdx, compIdx); static_assert(std::is_same<decltype(tmpVal), RhsEval>::value, "The default return value must be the scalar used by the fluid state!"); } catch (...) {};
            try { val = FluidSystem::template fugacityCoefficient<FluidState, LhsEval>(fs, paramCache, phaseIdx, compIdx); } catch (...) {};
            try { scalarVal = FluidSystem::template fugacityCoefficient<FluidState, Scalar>(fs, paramCache, phaseIdx, compIdx); } catch (...) {};
            fs.allowComposition(true);
            try { [[maybe_unused]] auto tmpVal = FluidSystem::diffusionCoefficient(fs, paramCache, phaseIdx, compIdx); static_assert(std::is_same<decltype(tmpVal), RhsEval>::value, "The default return value must be the scalar used by the fluid state!"); } catch (...) {};
            try { val = FluidSystem::template diffusionCoefficient<FluidState, LhsEval>(fs, paramCache, phaseIdx, compIdx); } catch (...) {};
            try { scalarVal = FluidSystem::template fugacityCoefficient<FluidState, Scalar>(fs, paramCache, phaseIdx, compIdx); } catch (...) {};
        }
    }
 
    // test for phaseName(), isLiquid() and isIdealGas()
    for (unsigned phaseIdx = 0; phaseIdx < numPhases; ++ phaseIdx) {
        [[maybe_unused]] std::string name{FluidSystem::phaseName(phaseIdx)};
        std::ignore = FluidSystem::isLiquid(phaseIdx);
        std::ignore = FluidSystem::isIdealGas(phaseIdx);
    }
 
    // test for molarMass() and componentName()
    for (unsigned compIdx = 0; compIdx < numComponents; ++ compIdx) {
        std::ignore = FluidSystem::molarMass(compIdx);
        std::string{FluidSystem::componentName(compIdx)};
    }
}
 
#endif