[openmamba-users-it] connessione internet
Paolo Mastropasqua
paolo-sisto a hotmail.it
Lun 15 Ott 2007 22:24:22 CEST
scusate se non vi ho risposto prima ma ho avuto dei problemi con internet.ho seguito le tue istruzioni e questo è quello che ne è venuto fuori:1)[root a openmamba-livecd ~]# ifconfigeth0 Link encap:Ethernet HWaddr 00:01:6C:E0:42:3B UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) Interrupt:16 Base address:0x8000lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:2 errors:0 dropped:0 overruns:0 frame:0 TX packets:2 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:196 (196.0 b) TX bytes:196 (196.0 b)2)[root a openmamba-livecd ~]# dmesg6>usb 3-1: new full speed USB device using uhci_hcd and address 107usb 3-1: device not accepting address 107, error -71usb 3-1: new full speed USB device using uhci_hcd and address 108usb 3-1: device not accepting address 108, error -71usb 3-2: USB disconnect, address 104drivers/usb/class/usblp.c: usblp0: removedusb 3-2: new full speed USB device using uhci_hcd and address 109usb 3-2: configuration #1 chosen from 1 choicedrivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 109 if 0 alt 0 proto 2 vid 0x03F0 pid 0x6004usb 3-1: new full speed USB device using uhci_hcd and address 110usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 111usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 112usb 3-1: device not accepting address 112, error -71usb 3-1: new full speed USB device using uhci_hcd and address 113usb 3-1: device not accepting address 113, error -71usb 3-2: USB disconnect, address 109drivers/usb/class/usblp.c: usblp0: removedusb 3-2: new full speed USB device using uhci_hcd and address 114usb 3-2: configuration #1 chosen from 1 choicedrivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 114 if 0 alt 0 proto 2 vid 0x03F0 pid 0x6004usb 3-1: new full speed USB device using uhci_hcd and address 115usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 116usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 117usb 3-1: device not accepting address 117, error -71usb 3-1: new full speed USB device using uhci_hcd and address 118usb 3-1: device not accepting address 118, error -71usb 3-2: USB disconnect, address 114drivers/usb/class/usblp.c: usblp0: removedusb 3-2: new full speed USB device using uhci_hcd and address 119usb 3-2: configuration #1 chosen from 1 choicedrivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 119 if 0 alt 0 proto 2 vid 0x03F0 pid 0x6004usb 3-1: new full speed USB device using uhci_hcd and address 120usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 121usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 122usb 3-1: device not accepting address 122, error -71usb 3-1: new full speed USB device using uhci_hcd and address 123usb 3-1: device not accepting address 123, error -71usb 3-2: USB disconnect, address 119drivers/usb/class/usblp.c: usblp0: removedusb 3-2: new full speed USB device using uhci_hcd and address 124usb 3-2: configuration #1 chosen from 1 choicedrivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 124 if 0 alt 0 proto 2 vid 0x03F0 pid 0x6004usb 3-1: new full speed USB device using uhci_hcd and address 125usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 126usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 127usb 3-1: device not accepting address 127, error -71usb 3-1: new full speed USB device using uhci_hcd and address 2usb 3-1: device not accepting address 2, error -71usb 3-2: USB disconnect, address 124drivers/usb/class/usblp.c: usblp0: removedusb 3-2: new full speed USB device using uhci_hcd and address 3usb 3-2: configuration #1 chosen from 1 choicedrivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x03F0 pid 0x6004usb 3-1: new full speed USB device using uhci_hcd and address 4usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 5usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 6usb 3-1: device not accepting address 6, error -71usb 3-1: new full speed USB device using uhci_hcd and address 7usb 3-1: device not accepting address 7, error -71usb 3-2: USB disconnect, address 3drivers/usb/class/usblp.c: usblp0: removedusb 3-2: new full speed USB device using uhci_hcd and address 8usb 3-2: configuration #1 chosen from 1 choicedrivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 8 if 0 alt 0 proto 2 vid 0x03F0 pid 0x6004usb 3-1: new full speed USB device using uhci_hcd and address 9usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 10usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 11usb 3-1: device not accepting address 11, error -71usb 3-1: new full speed USB device using uhci_hcd and address 12usb 3-1: device not accepting address 12, error -71usb 3-2: USB disconnect, address 8drivers/usb/class/usblp.c: usblp0: removedusb 3-2: new full speed USB device using uhci_hcd and address 13usb 3-2: configuration #1 chosen from 1 choicedrivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 13 if 0 alt 0 proto 2 vid 0x03F0 pid 0x6004usb 3-1: new full speed USB device using uhci_hcd and address 14usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 15usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 16usb 3-1: device not accepting address 16, error -71usb 3-1: new full speed USB device using uhci_hcd and address 17usb 3-1: device not accepting address 17, error -71usb 3-2: USB disconnect, address 13drivers/usb/class/usblp.c: usblp0: removedusb 3-2: new full speed USB device using uhci_hcd and address 18usb 3-2: configuration #1 chosen from 1 choicedrivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 18 if 0 alt 0 proto 2 vid 0x03F0 pid 0x6004usb 3-1: new full speed USB device using uhci_hcd and address 19usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 20usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 21usb 3-1: device not accepting address 21, error -71usb 3-1: new full speed USB device using uhci_hcd and address 22usb 3-1: device not accepting address 22, error -71usb 3-2: USB disconnect, address 18[root a openmamba-livecd ~]# dmesg6>usb 3-1: new full speed USB device using uhci_hcd and address 107usb 3-1: device not accepting address 107, error -71usb 3-1: new full speed USB device using uhci_hcd and address 108usb 3-1: device not accepting address 108, error -71usb 3-2: USB disconnect, address 104drivers/usb/class/usblp.c: usblp0: removedusb 3-2: new full speed USB device using uhci_hcd and address 109usb 3-2: configuration #1 chosen from 1 choicedrivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 109 if 0 alt 0 proto 2 vid 0x03F0 pid 0x6004usb 3-1: new full speed USB device using uhci_hcd and address 110usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 111usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 112usb 3-1: device not accepting address 112, error -71usb 3-1: new full speed USB device using uhci_hcd and address 113usb 3-1: device not accepting address 113, error -71usb 3-2: USB disconnect, address 109drivers/usb/class/usblp.c: usblp0: removedusb 3-2: new full speed USB device using uhci_hcd and address 114usb 3-2: configuration #1 chosen from 1 choicedrivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 114 if 0 alt 0 proto 2 vid 0x03F0 pid 0x6004usb 3-1: new full speed USB device using uhci_hcd and address 115usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 116usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 117usb 3-1: device not accepting address 117, error -71usb 3-1: new full speed USB device using uhci_hcd and address 118usb 3-1: device not accepting address 118, error -71usb 3-2: USB disconnect, address 114drivers/usb/class/usblp.c: usblp0: removedusb 3-2: new full speed USB device using uhci_hcd and address 119usb 3-2: configuration #1 chosen from 1 choicedrivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 119 if 0 alt 0 proto 2 vid 0x03F0 pid 0x6004usb 3-1: new full speed USB device using uhci_hcd and address 120usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 121usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 122usb 3-1: device not accepting address 122, error -71usb 3-1: new full speed USB device using uhci_hcd and address 123usb 3-1: device not accepting address 123, error -71usb 3-2: USB disconnect, address 119drivers/usb/class/usblp.c: usblp0: removedusb 3-2: new full speed USB device using uhci_hcd and address 124usb 3-2: configuration #1 chosen from 1 choicedrivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 124 if 0 alt 0 proto 2 vid 0x03F0 pid 0x6004usb 3-1: new full speed USB device using uhci_hcd and address 125usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 126usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 127usb 3-1: device not accepting address 127, error -71usb 3-1: new full speed USB device using uhci_hcd and address 2usb 3-1: device not accepting address 2, error -71usb 3-2: USB disconnect, address 124drivers/usb/class/usblp.c: usblp0: removedusb 3-2: new full speed USB device using uhci_hcd and address 3usb 3-2: configuration #1 chosen from 1 choicedrivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x03F0 pid 0x6004usb 3-1: new full speed USB device using uhci_hcd and address 4usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 5usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 6usb 3-1: device not accepting address 6, error -71usb 3-1: new full speed USB device using uhci_hcd and address 7usb 3-1: device not accepting address 7, error -71usb 3-2: USB disconnect, address 3drivers/usb/class/usblp.c: usblp0: removedusb 3-2: new full speed USB device using uhci_hcd and address 8usb 3-2: configuration #1 chosen from 1 choicedrivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 8 if 0 alt 0 proto 2 vid 0x03F0 pid 0x6004usb 3-1: new full speed USB device using uhci_hcd and address 9usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 10usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 11usb 3-1: device not accepting address 11, error -71usb 3-1: new full speed USB device using uhci_hcd and address 12usb 3-1: device not accepting address 12, error -71usb 3-2: USB disconnect, address 8drivers/usb/class/usblp.c: usblp0: removedusb 3-2: new full speed USB device using uhci_hcd and address 13usb 3-2: configuration #1 chosen from 1 choicedrivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 13 if 0 alt 0 proto 2 vid 0x03F0 pid 0x6004usb 3-1: new full speed USB device using uhci_hcd and address 14usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 15usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 16usb 3-1: device not accepting address 16, error -71usb 3-1: new full speed USB device using uhci_hcd and address 17usb 3-1: device not accepting address 17, error -71usb 3-2: USB disconnect, address 13drivers/usb/class/usblp.c: usblp0: removedusb 3-2: new full speed USB device using uhci_hcd and address 18usb 3-2: configuration #1 chosen from 1 choicedrivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 18 if 0 alt 0 proto 2 vid 0x03F0 pid 0x6004usb 3-1: new full speed USB device using uhci_hcd and address 19usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 20usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 21usb 3-1: device not accepting address 21, error -71usb 3-1: new full speed USB device using uhci_hcd and address 22usb 3-1: device not accepting address 22, error -71usb 3-2: USB disconnect, address 18drivers/usb/class/usblp.c: usblp0: removedusb 3-2: new full speed USB device using uhci_hcd and address 23usb 3-2: configuration #1 chosen from 1 choicedrivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 23 if 0 alt 0 proto 2 vid 0x03F0 pid 0x6004usb 3-1: new full speed USB device using uhci_hcd and address 24usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 25usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 26usb 3-1: device not accepting address 26, error -71usb 3-1: new full speed USB device using uhci_hcd and address 27usb 3-1: device not accepting address 27, error -71usb 3-2: USB disconnect, address 23drivers/usb/class/usblp.c: usblp0: removedusb 3-2: new full speed USB device using uhci_hcd and address 28usb 3-2: configuration #1 chosen from 1 choicedrivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 28 if 0 alt 0 proto 2 vid 0x03F0 pid 0x6004usb 3-1: new full speed USB device using uhci_hcd and address 29usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 30usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 31usb 3-1: device not accepting address 31, error -71usb 3-1: new full speed USB device using uhci_hcd and address 32usb 3-1: device not accepting address 32, error -71usb 3-2: USB disconnect, address 28drivers/usb/class/usblp.c: usblp0: removedusb 3-2: new full speed USB device using uhci_hcd and address 33usb 3-2: configuration #1 chosen from 1 choicedrivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 33 if 0 alt 0 proto 2 vid 0x03F0 pid 0x6004usb 3-1: new full speed USB device using uhci_hcd and address 34usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 35usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 36usb 3-1: device not accepting address 36, error -71usb 3-1: new full speed USB device using uhci_hcd and address 37usb 3-1: device not accepting address 37, error -71usb 3-2: USB disconnect, address 33drivers/usb/class/usblp.c: usblp0: removedusb 3-2: new full speed USB device using uhci_hcd and address 38usb 3-2: configuration #1 chosen from 1 choicedrivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 38 if 0 alt 0 proto 2 vid 0x03F0 pid 0x6004usb 3-1: new full speed USB device using uhci_hcd and address 39usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 40usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 41usb 3-1: device not accepting address 41, error -71usb 3-1: new full speed USB device using uhci_hcd and address 42usb 3-1: device not accepting address 42, error -71usb 3-2: USB disconnect, address 38drivers/usb/class/usblp.c: usblp0: removedusb 3-2: new full speed USB device using uhci_hcd and address 43usb 3-2: configuration #1 chosen from 1 choicedrivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 43 if 0 alt 0 proto 2 vid 0x03F0 pid 0x6004usb 3-1: new full speed USB device using uhci_hcd and address 44usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 45usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 46usb 3-1: device not accepting address 46, error -71usb 3-1: new full speed USB device using uhci_hcd and address 47usb 3-1: device not accepting address 47, error -71usb 3-2: USB disconnect, address 43drivers/usb/class/usblp.c: usblp0: removedusb 3-2: new full speed USB device using uhci_hcd and address 48usb 3-2: configuration #1 chosen from 1 choicedrivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 48 if 0 alt 0 proto 2 vid 0x03F0 pid 0x6004usb 3-1: new full speed USB device using uhci_hcd and address 49usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 50usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 51usb 3-1: device not accepting address 51, error -71usb 3-1: new full speed USB device using uhci_hcd and address 52usb 3-1: device not accepting address 52, error -71usb 3-2: USB disconnect, address 48drivers/usb/class/usblp.c: usblp0: removedusb 3-2: new full speed USB device using uhci_hcd and address 53usb 3-2: configuration #1 chosen from 1 choicedrivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 53 if 0 alt 0 proto 2 vid 0x03F0 pid 0x6004usb 3-1: new full speed USB device using uhci_hcd and address 54usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 55usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 56usb 3-1: device not accepting address 56, error -71usb 3-1: new full speed USB device using uhci_hcd and address 57usb 3-1: device not accepting address 57, error -71usb 3-2: USB disconnect, address 53drivers/usb/class/usblp.c: usblp0: removedusb 3-2: new full speed USB device using uhci_hcd and address 58usb 3-2: configuration #1 chosen from 1 choicedrivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 58 if 0 alt 0 proto 2 vid 0x03F0 pid 0x6004usb 3-1: new full speed USB device using uhci_hcd and address 59usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 60usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 61usb 3-1: device not accepting address 61, error -71usb 3-1: new full speed USB device using uhci_hcd and address 62usb 3-1: device not accepting address 62, error -71usb 3-2: USB disconnect, address 58drivers/usb/class/usblp.c: usblp0: removedusb 3-2: new full speed USB device using uhci_hcd and address 63usb 3-2: configuration #1 chosen from 1 choicedrivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 63 if 0 alt 0 proto 2 vid 0x03F0 pid 0x6004usb 3-1: new full speed USB device using uhci_hcd and address 64usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 65usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 66usb 3-1: device not accepting address 66, error -71usb 3-1: new full speed USB device using uhci_hcd and address 67usb 3-1: device not accepting address 67, error -71usb 3-2: USB disconnect, address 63drivers/usb/class/usblp.c: usblp0: removedusb 3-2: new full speed USB device using uhci_hcd and address 68usb 3-2: configuration #1 chosen from 1 choicedrivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 68 if 0 alt 0 proto 2 vid 0x03F0 pid 0x6004usb 3-1: new full speed USB device using uhci_hcd and address 69usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 70usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 71usb 3-1: device not accepting address 71, error -71usb 3-1: new full speed USB device using uhci_hcd and address 72usb 3-1: device not accepting address 72, error -71usb 3-2: USB disconnect, address 68drivers/usb/class/usblp.c: usblp0: removedusb 3-2: new full speed USB device using uhci_hcd and address 73usb 3-2: configuration #1 chosen from 1 choicedrivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 73 if 0 alt 0 proto 2 vid 0x03F0 pid 0x6004usb 3-1: new full speed USB device using uhci_hcd and address 74usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 75usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 76usb 3-1: device not accepting address 76, error -71usb 3-1: new full speed USB device using uhci_hcd and address 77usb 3-1: device not accepting address 77, error -71usb 3-2: USB disconnect, address 73drivers/usb/class/usblp.c: usblp0: removedusb 3-2: new full speed USB device using uhci_hcd and address 78usb 3-2: configuration #1 chosen from 1 choicedrivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 78 if 0 alt 0 proto 2 vid 0x03F0 pid 0x6004usb 3-1: new full speed USB device using uhci_hcd and address 79usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 80usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 81usb 3-1: device not accepting address 81, error -71usb 3-1: new full speed USB device using uhci_hcd and address 82usb 3-1: device not accepting address 82, error -71usb 3-2: USB disconnect, address 78drivers/usb/class/usblp.c: usblp0: removedusb 3-2: new full speed USB device using uhci_hcd and address 83usb 3-2: configuration #1 chosen from 1 choicedrivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 83 if 0 alt 0 proto 2 vid 0x03F0 pid 0x6004usb 3-1: new full speed USB device using uhci_hcd and address 84usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 85usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 86usb 3-1: device not accepting address 86, error -71usb 3-1: new full speed USB device using uhci_hcd and address 87usb 3-1: device not accepting address 87, error -71usb 3-2: USB disconnect, address 83drivers/usb/class/usblp.c: usblp0: removedusb 3-2: new full speed USB device using uhci_hcd and address 88usb 3-2: configuration #1 chosen from 1 choicedrivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 88 if 0 alt 0 proto 2 vid 0x03F0 pid 0x6004usb 3-1: new full speed USB device using uhci_hcd and address 89usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 90usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 91usb 3-1: device not accepting address 91, error -71usb 3-1: new full speed USB device using uhci_hcd and address 92usb 3-1: device not accepting address 92, error -71usb 3-2: USB disconnect, address 88drivers/usb/class/usblp.c: usblp0: removedusb 3-2: new full speed USB device using uhci_hcd and address 93usb 3-2: configuration #1 chosen from 1 choicedrivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 93 if 0 alt 0 proto 2 vid 0x03F0 pid 0x6004usb 3-1: new full speed USB device using uhci_hcd and address 94usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 95usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 96usb 3-1: device not accepting address 96, error -71usb 3-1: new full speed USB device using uhci_hcd and address 97usb 3-1: device not accepting address 97, error -71usb 3-2: USB disconnect, address 93drivers/usb/class/usblp.c: usblp0: removedusb 3-2: new full speed USB device using uhci_hcd and address 98usb 3-2: configuration #1 chosen from 1 choicedrivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 98 if 0 alt 0 proto 2 vid 0x03F0 pid 0x6004usb 3-1: new full speed USB device using uhci_hcd and address 99usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 100usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 101usb 3-1: device not accepting address 101, error -71usb 3-1: new full speed USB device using uhci_hcd and address 102usb 3-1: device not accepting address 102, error -71usb 3-2: USB disconnect, address 98drivers/usb/class/usblp.c: usblp0: removedusb 3-2: new full speed USB device using uhci_hcd and address 103usb 3-2: configuration #1 chosen from 1 choicedrivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 103 if 0 alt 0 proto 2 vid 0x03F0 pid 0x6004usb 3-1: new full speed USB device using uhci_hcd and address 104usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 105usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 106usb 3-1: device not accepting address 106, error -71usb 3-1: new full speed USB device using uhci_hcd and address 107usb 3-1: device not accepting address 107, error -71usb 3-2: USB disconnect, address 103drivers/usb/class/usblp.c: usblp0: removedusb 3-2: new full speed USB device using uhci_hcd and address 108usb 3-2: configuration #1 chosen from 1 choicedrivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 108 if 0 alt 0 proto 2 vid 0x03F0 pid 0x6004usb 3-1: new full speed USB device using uhci_hcd and address 109usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 110usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 111usb 3-1: device not accepting address 111, error -71usb 3-1: new full speed USB device using uhci_hcd and address 112usb 3-1: device not accepting address 112, error -71usb 3-2: USB disconnect, address 108drivers/usb/class/usblp.c: usblp0: removedusb 3-2: new full speed USB device using uhci_hcd and address 113usb 3-2: configuration #1 chosen from 1 choicedrivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 113 if 0 alt 0 proto 2 vid 0x03F0 pid 0x6004usb 3-1: new full speed USB device using uhci_hcd and address 114usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 115usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 116usb 3-1: device not accepting address 116, error -71usb 3-1: new full speed USB device using uhci_hcd and address 117usb 3-1: device not accepting address 117, error -71usb 3-2: USB disconnect, address 113drivers/usb/class/usblp.c: usblp0: removedusb 3-2: new full speed USB device using uhci_hcd and address 118usb 3-2: configuration #1 chosen from 1 choicedrivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 118 if 0 alt 0 proto 2 vid 0x03F0 pid 0x6004usb 3-1: new full speed USB device using uhci_hcd and address 119usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 120usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 121usb 3-1: device not accepting address 121, error -71usb 3-1: new full speed USB device using uhci_hcd and address 122usb 3-1: device not accepting address 122, error -71usb 3-2: USB disconnect, address 118drivers/usb/class/usblp.c: usblp0: removedusb 3-2: new full speed USB device using uhci_hcd and address 123usb 3-2: configuration #1 chosen from 1 choicedrivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 123 if 0 alt 0 proto 2 vid 0x03F0 pid 0x6004usb 3-1: new full speed USB device using uhci_hcd and address 124usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 125usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 126usb 3-1: device not accepting address 126, error -71usb 3-1: new full speed USB device using uhci_hcd and address 127usb 3-1: device not accepting address 127, error -71usb 3-2: USB disconnect, address 123drivers/usb/class/usblp.c: usblp0: removedusb 3-2: new full speed USB device using uhci_hcd and address 2usb 3-2: configuration #1 chosen from 1 choicedrivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x6004usb 3-1: new full speed USB device using uhci_hcd and address 3usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 4usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 5usb 3-1: device not accepting address 5, error -71usb 3-1: new full speed USB device using uhci_hcd and address 6usb 3-1: device not accepting address 6, error -71usb 3-2: USB disconnect, address 2drivers/usb/class/usblp.c: usblp0: removedusb 3-2: new full speed USB device using uhci_hcd and address 7usb 3-2: configuration #1 chosen from 1 choicedrivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 7 if 0 alt 0 proto 2 vid 0x03F0 pid 0x6004usb 3-1: new full speed USB device using uhci_hcd and address 8usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 9usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 10usb 3-1: device not accepting address 10, error -71usb 3-1: new full speed USB device using uhci_hcd and address 11usb 3-1: device not accepting address 11, error -71usb 3-2: USB disconnect, address 7drivers/usb/class/usblp.c: usblp0: removedusb 3-2: new full speed USB device using uhci_hcd and address 12usb 3-2: configuration #1 chosen from 1 choicedrivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 12 if 0 alt 0 proto 2 vid 0x03F0 pid 0x6004usb 3-1: new full speed USB device using uhci_hcd and address 13usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 14usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 15usb 3-1: device not accepting address 15, error -71usb 3-1: new full speed USB device using uhci_hcd and address 16usb 3-1: device not accepting address 16, error -71usb 3-2: USB disconnect, address 12drivers/usb/class/usblp.c: usblp0: removedusb 3-2: new full speed USB device using uhci_hcd and address 17usb 3-2: configuration #1 chosen from 1 choicedrivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 17 if 0 alt 0 proto 2 vid 0x03F0 pid 0x6004usb 3-1: new full speed USB device using uhci_hcd and address 18usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 19usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 20usb 3-1: device not accepting address 20, error -71usb 3-1: new full speed USB device using uhci_hcd and address 21usb 3-1: device not accepting address 21, error -71usb 3-2: USB disconnect, address 17drivers/usb/class/usblp.c: usblp0: removedusb 3-2: new full speed USB device using uhci_hcd and address 22usb 3-2: configuration #1 chosen from 1 choicedrivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 22 if 0 alt 0 proto 2 vid 0x03F0 pid 0x6004usb 3-1: new full speed USB device using uhci_hcd and address 23usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 24usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 25usb 3-1: device not accepting address 25, error -71usb 3-1: new full speed USB device using uhci_hcd and address 26usb 3-1: device not accepting address 26, error -71usb 3-2: USB disconnect, address 22drivers/usb/class/usblp.c: usblp0: removedusb 3-2: new full speed USB device using uhci_hcd and address 27usb 3-2: configuration #1 chosen from 1 choicedrivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 27 if 0 alt 0 proto 2 vid 0x03F0 pid 0x6004usb 3-1: new full speed USB device using uhci_hcd and address 28usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 29usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 30usb 3-1: device not accepting address 30, error -71usb 3-1: new full speed USB device using uhci_hcd and address 31usb 3-1: device not accepting address 31, error -71usb 3-2: USB disconnect, address 27drivers/usb/class/usblp.c: usblp0: removedusb 3-2: new full speed USB device using uhci_hcd and address 32usb 3-2: configuration #1 chosen from 1 choicedrivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 32 if 0 alt 0 proto 2 vid 0x03F0 pid 0x6004usb 3-1: new full speed USB device using uhci_hcd and address 33usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 34usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 35usb 3-1: device not accepting address 35, error -71usb 3-1: new full speed USB device using uhci_hcd and address 36usb 3-1: device not accepting address 36, error -71usb 3-2: USB disconnect, address 32drivers/usb/class/usblp.c: usblp0: removedusb 3-2: new full speed USB device using uhci_hcd and address 37usb 3-2: configuration #1 chosen from 1 choicedrivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 37 if 0 alt 0 proto 2 vid 0x03F0 pid 0x6004drivers/usb/class/usblp.c: usblp0: removedusb 3-2: new full speed USB device using uhci_hcd and address 23usb 3-2: configuration #1 chosen from 1 choicedrivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 23 if 0 alt 0 proto 2 vid 0x03F0 pid 0x6004usb 3-1: new full speed USB device using uhci_hcd and address 24usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 25usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 26usb 3-1: device not accepting address 26, error -71usb 3-1: new full speed USB device using uhci_hcd and address 27usb 3-1: device not accepting address 27, error -71usb 3-2: USB disconnect, address 23drivers/usb/class/usblp.c: usblp0: removedusb 3-2: new full speed USB device using uhci_hcd and address 28usb 3-2: configuration #1 chosen from 1 choicedrivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 28 if 0 alt 0 proto 2 vid 0x03F0 pid 0x6004usb 3-1: new full speed USB device using uhci_hcd and address 29usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 30usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 31usb 3-1: device not accepting address 31, error -71usb 3-1: new full speed USB device using uhci_hcd and address 32usb 3-1: device not accepting address 32, error -71usb 3-2: USB disconnect, address 28drivers/usb/class/usblp.c: usblp0: removedusb 3-2: new full speed USB device using uhci_hcd and address 33usb 3-2: configuration #1 chosen from 1 choicedrivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 33 if 0 alt 0 proto 2 vid 0x03F0 pid 0x6004usb 3-1: new full speed USB device using uhci_hcd and address 34usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 35usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 36usb 3-1: device not accepting address 36, error -71usb 3-1: new full speed USB device using uhci_hcd and address 37usb 3-1: device not accepting address 37, error -71usb 3-2: USB disconnect, address 33drivers/usb/class/usblp.c: usblp0: removedusb 3-2: new full speed USB device using uhci_hcd and address 38usb 3-2: configuration #1 chosen from 1 choicedrivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 38 if 0 alt 0 proto 2 vid 0x03F0 pid 0x6004usb 3-1: new full speed USB device using uhci_hcd and address 39usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 40usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 41usb 3-1: device not accepting address 41, error -71usb 3-1: new full speed USB device using uhci_hcd and address 42usb 3-1: device not accepting address 42, error -71usb 3-2: USB disconnect, address 38drivers/usb/class/usblp.c: usblp0: removedusb 3-2: new full speed USB device using uhci_hcd and address 43usb 3-2: configuration #1 chosen from 1 choicedrivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 43 if 0 alt 0 proto 2 vid 0x03F0 pid 0x6004usb 3-1: new full speed USB device using uhci_hcd and address 44usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 45usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 46usb 3-1: device not accepting address 46, error -71usb 3-1: new full speed USB device using uhci_hcd and address 47usb 3-1: device not accepting address 47, error -71usb 3-2: USB disconnect, address 43drivers/usb/class/usblp.c: usblp0: removedusb 3-2: new full speed USB device using uhci_hcd and address 48usb 3-2: configuration #1 chosen from 1 choicedrivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 48 if 0 alt 0 proto 2 vid 0x03F0 pid 0x6004usb 3-1: new full speed USB device using uhci_hcd and address 49usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 50usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 51usb 3-1: device not accepting address 51, error -71usb 3-1: new full speed USB device using uhci_hcd and address 52usb 3-1: device not accepting address 52, error -71usb 3-2: USB disconnect, address 48drivers/usb/class/usblp.c: usblp0: removedusb 3-2: new full speed USB device using uhci_hcd and address 53usb 3-2: configuration #1 chosen from 1 choicedrivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 53 if 0 alt 0 proto 2 vid 0x03F0 pid 0x6004usb 3-1: new full speed USB device using uhci_hcd and address 54usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 55usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 56usb 3-1: device not accepting address 56, error -71usb 3-1: new full speed USB device using uhci_hcd and address 57usb 3-1: device not accepting address 57, error -71usb 3-2: USB disconnect, address 53drivers/usb/class/usblp.c: usblp0: removedusb 3-2: new full speed USB device using uhci_hcd and address 58usb 3-2: configuration #1 chosen from 1 choicedrivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 58 if 0 alt 0 proto 2 vid 0x03F0 pid 0x6004usb 3-1: new full speed USB device using uhci_hcd and address 59usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 60usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 61usb 3-1: device not accepting address 61, error -71usb 3-1: new full speed USB device using uhci_hcd and address 62usb 3-1: device not accepting address 62, error -71usb 3-2: USB disconnect, address 58drivers/usb/class/usblp.c: usblp0: removedusb 3-2: new full speed USB device using uhci_hcd and address 63usb 3-2: configuration #1 chosen from 1 choicedrivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 63 if 0 alt 0 proto 2 vid 0x03F0 pid 0x6004usb 3-1: new full speed USB device using uhci_hcd and address 64usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 65usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 66usb 3-1: device not accepting address 66, error -71usb 3-1: new full speed USB device using uhci_hcd and address 67usb 3-1: device not accepting address 67, error -71usb 3-2: USB disconnect, address 63drivers/usb/class/usblp.c: usblp0: removedusb 3-2: new full speed USB device using uhci_hcd and address 68usb 3-2: configuration #1 chosen from 1 choicedrivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 68 if 0 alt 0 proto 2 vid 0x03F0 pid 0x6004usb 3-1: new full speed USB device using uhci_hcd and address 69usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 70usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 71usb 3-1: device not accepting address 71, error -71usb 3-1: new full speed USB device using uhci_hcd and address 72usb 3-1: device not accepting address 72, error -71usb 3-2: USB disconnect, address 68drivers/usb/class/usblp.c: usblp0: removedusb 3-2: new full speed USB device using uhci_hcd and address 73usb 3-2: configuration #1 chosen from 1 choicedrivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 73 if 0 alt 0 proto 2 vid 0x03F0 pid 0x6004usb 3-1: new full speed USB device using uhci_hcd and address 74usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 75usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 76usb 3-1: device not accepting address 76, error -71usb 3-1: new full speed USB device using uhci_hcd and address 77usb 3-1: device not accepting address 77, error -71usb 3-2: USB disconnect, address 73drivers/usb/class/usblp.c: usblp0: removedusb 3-2: new full speed USB device using uhci_hcd and address 78usb 3-2: configuration #1 chosen from 1 choicedrivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 78 if 0 alt 0 proto 2 vid 0x03F0 pid 0x6004usb 3-1: new full speed USB device using uhci_hcd and address 79usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 80usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 81usb 3-1: device not accepting address 81, error -71usb 3-1: new full speed USB device using uhci_hcd and address 82usb 3-1: device not accepting address 82, error -71usb 3-2: USB disconnect, address 78drivers/usb/class/usblp.c: usblp0: removedusb 3-2: new full speed USB device using uhci_hcd and address 83usb 3-2: configuration #1 chosen from 1 choicedrivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 83 if 0 alt 0 proto 2 vid 0x03F0 pid 0x6004usb 3-1: new full speed USB device using uhci_hcd and address 84usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 85usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 86usb 3-1: device not accepting address 86, error -71usb 3-1: new full speed USB device using uhci_hcd and address 87usb 3-1: device not accepting address 87, error -71usb 3-2: USB disconnect, address 83drivers/usb/class/usblp.c: usblp0: removedusb 3-2: new full speed USB device using uhci_hcd and address 88usb 3-2: configuration #1 chosen from 1 choicedrivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 88 if 0 alt 0 proto 2 vid 0x03F0 pid 0x6004usb 3-1: new full speed USB device using uhci_hcd and address 89usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 90usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 91usb 3-1: device not accepting address 91, error -71usb 3-1: new full speed USB device using uhci_hcd and address 92usb 3-1: device not accepting address 92, error -71usb 3-2: USB disconnect, address 88drivers/usb/class/usblp.c: usblp0: removedusb 3-2: new full speed USB device using uhci_hcd and address 93usb 3-2: configuration #1 chosen from 1 choicedrivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 93 if 0 alt 0 proto 2 vid 0x03F0 pid 0x6004usb 3-1: new full speed USB device using uhci_hcd and address 94usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 95usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 96usb 3-1: device not accepting address 96, error -71usb 3-1: new full speed USB device using uhci_hcd and address 97usb 3-1: device not accepting address 97, error -71usb 3-2: USB disconnect, address 93drivers/usb/class/usblp.c: usblp0: removedusb 3-2: new full speed USB device using uhci_hcd and address 98usb 3-2: configuration #1 chosen from 1 choicedrivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 98 if 0 alt 0 proto 2 vid 0x03F0 pid 0x6004usb 3-1: new full speed USB device using uhci_hcd and address 99usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 100usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 101usb 3-1: device not accepting address 101, error -71usb 3-1: new full speed USB device using uhci_hcd and address 102usb 3-1: device not accepting address 102, error -71usb 3-2: USB disconnect, address 98drivers/usb/class/usblp.c: usblp0: removedusb 3-2: new full speed USB device using uhci_hcd and address 103usb 3-2: configuration #1 chosen from 1 choicedrivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 103 if 0 alt 0 proto 2 vid 0x03F0 pid 0x6004usb 3-1: new full speed USB device using uhci_hcd and address 104usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 105usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 106usb 3-1: device not accepting address 106, error -71usb 3-1: new full speed USB device using uhci_hcd and address 107usb 3-1: device not accepting address 107, error -71usb 3-2: USB disconnect, address 103drivers/usb/class/usblp.c: usblp0: removedusb 3-2: new full speed USB device using uhci_hcd and address 108usb 3-2: configuration #1 chosen from 1 choicedrivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 108 if 0 alt 0 proto 2 vid 0x03F0 pid 0x6004usb 3-1: new full speed USB device using uhci_hcd and address 109usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 110usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 111usb 3-1: device not accepting address 111, error -71usb 3-1: new full speed USB device using uhci_hcd and address 112usb 3-1: device not accepting address 112, error -71usb 3-2: USB disconnect, address 108drivers/usb/class/usblp.c: usblp0: removedusb 3-2: new full speed USB device using uhci_hcd and address 113usb 3-2: configuration #1 chosen from 1 choicedrivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 113 if 0 alt 0 proto 2 vid 0x03F0 pid 0x6004usb 3-1: new full speed USB device using uhci_hcd and address 114usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 115usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 116usb 3-1: device not accepting address 116, error -71usb 3-1: new full speed USB device using uhci_hcd and address 117usb 3-1: device not accepting address 117, error -71usb 3-2: USB disconnect, address 113drivers/usb/class/usblp.c: usblp0: removedusb 3-2: new full speed USB device using uhci_hcd and address 118usb 3-2: configuration #1 chosen from 1 choicedrivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 118 if 0 alt 0 proto 2 vid 0x03F0 pid 0x6004usb 3-1: new full speed USB device using uhci_hcd and address 119usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 120usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 121usb 3-1: device not accepting address 121, error -71usb 3-1: new full speed USB device using uhci_hcd and address 122usb 3-1: device not accepting address 122, error -71usb 3-2: USB disconnect, address 118drivers/usb/class/usblp.c: usblp0: removedusb 3-2: new full speed USB device using uhci_hcd and address 123usb 3-2: configuration #1 chosen from 1 choicedrivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 123 if 0 alt 0 proto 2 vid 0x03F0 pid 0x6004usb 3-1: new full speed USB device using uhci_hcd and address 124usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 125usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 126usb 3-1: device not accepting address 126, error -71usb 3-1: new full speed USB device using uhci_hcd and address 127usb 3-1: device not accepting address 127, error -71usb 3-2: USB disconnect, address 123drivers/usb/class/usblp.c: usblp0: removedusb 3-2: new full speed USB device using uhci_hcd and address 2usb 3-2: configuration #1 chosen from 1 choicedrivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x6004usb 3-1: new full speed USB device using uhci_hcd and address 3usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 4usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 5usb 3-1: device not accepting address 5, error -71usb 3-1: new full speed USB device using uhci_hcd and address 6usb 3-1: device not accepting address 6, error -71usb 3-2: USB disconnect, address 2drivers/usb/class/usblp.c: usblp0: removedusb 3-2: new full speed USB device using uhci_hcd and address 7usb 3-2: configuration #1 chosen from 1 choicedrivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 7 if 0 alt 0 proto 2 vid 0x03F0 pid 0x6004usb 3-1: new full speed USB device using uhci_hcd and address 8usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 9usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 10usb 3-1: device not accepting address 10, error -71usb 3-1: new full speed USB device using uhci_hcd and address 11usb 3-1: device not accepting address 11, error -71usb 3-2: USB disconnect, address 7drivers/usb/class/usblp.c: usblp0: removedusb 3-2: new full speed USB device using uhci_hcd and address 12usb 3-2: configuration #1 chosen from 1 choicedrivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 12 if 0 alt 0 proto 2 vid 0x03F0 pid 0x6004usb 3-1: new full speed USB device using uhci_hcd and address 13usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 14usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 15usb 3-1: device not accepting address 15, error -71usb 3-1: new full speed USB device using uhci_hcd and address 16usb 3-1: device not accepting address 16, error -71usb 3-2: USB disconnect, address 12drivers/usb/class/usblp.c: usblp0: removedusb 3-2: new full speed USB device using uhci_hcd and address 17usb 3-2: configuration #1 chosen from 1 choicedrivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 17 if 0 alt 0 proto 2 vid 0x03F0 pid 0x6004usb 3-1: new full speed USB device using uhci_hcd and address 18usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 19usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 20usb 3-1: device not accepting address 20, error -71usb 3-1: new full speed USB device using uhci_hcd and address 21usb 3-1: device not accepting address 21, error -71usb 3-2: USB disconnect, address 17drivers/usb/class/usblp.c: usblp0: removedusb 3-2: new full speed USB device using uhci_hcd and address 22usb 3-2: configuration #1 chosen from 1 choicedrivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 22 if 0 alt 0 proto 2 vid 0x03F0 pid 0x6004usb 3-1: new full speed USB device using uhci_hcd and address 23usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 24usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 25usb 3-1: device not accepting address 25, error -71usb 3-1: new full speed USB device using uhci_hcd and address 26usb 3-1: device not accepting address 26, error -71usb 3-2: USB disconnect, address 22drivers/usb/class/usblp.c: usblp0: removedusb 3-2: new full speed USB device using uhci_hcd and address 27usb 3-2: configuration #1 chosen from 1 choicedrivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 27 if 0 alt 0 proto 2 vid 0x03F0 pid 0x6004usb 3-1: new full speed USB device using uhci_hcd and address 28usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 29usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 30usb 3-1: device not accepting address 30, error -71usb 3-1: new full speed USB device using uhci_hcd and address 31usb 3-1: device not accepting address 31, error -71usb 3-2: USB disconnect, address 27drivers/usb/class/usblp.c: usblp0: removedusb 3-2: new full speed USB device using uhci_hcd and address 32usb 3-2: configuration #1 chosen from 1 choicedrivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 32 if 0 alt 0 proto 2 vid 0x03F0 pid 0x6004usb 3-1: new full speed USB device using uhci_hcd and address 33usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 34usb 3-1: device descriptor read/64, error -71usb 3-1: device descriptor read/64, error -71usb 3-1: new full speed USB device using uhci_hcd and address 35usb 3-1: device not accepting address 35, error -71usb 3-1: new full speed USB device using uhci_hcd and address 36usb 3-1: device not accepting address 36, error -71usb 3-2: USB disconnect, address 32drivers/usb/class/usblp.c: usblp0: removedusb 3-2: new full speed USB device using uhci_hcd and address 37usb 3-2: configuration #1 chosen from 1 choicedrivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 37 if 0 alt 0 proto 2 vid 0x03F0 pid 0x60044a)[root a openmamba-livecd ~]# route -nKernel IP routing tableDestination Gateway Genmask Flags Metric Ref Use Iface 4b)se apro il file resolv.conf:# domain domain_name# search domain_namenameserver 127.0.0.1avviso che io non abbia la minima idea di cosa abbia fatto...ciao Paolo
> From: silvan.calarco a mambasoft.it> To: openmamba-users-it a openmamba.org> Date: Sat, 22 Sep 2007 14:32:24 +0200> Subject: Re: [openmamba-users-it] connessione internet> > Alle sabato 22 settembre 2007, Paolo Mastropasqua ha scritto:> > Ciao ragazzi,> > è da un 1 mese ormai che seguo le "vicende" di openmamba ma purtroppo non> > sono molto utile perchè non sono ankora riuscito ad accedere a internet!!> > aprendo pppoatm start il programma continua a caricare e poi non fa> > niente...se lo apro in konsole mi appare l'OK verde....e ciò mi fa pensare> > che sia tutto a posto..ma poi non riesco a connettermi lo stesso...quindi> > vorrei capire se c'è qualcosa che devo configurare (che non so nè cosa nè> > come)...> > Personalmente non ho la possibilità di testare il pppoatm, anzi l'ho fatto in > un caso in cui tutto funzionava correttamente ma perché il modem gestiva > internamente l'autenticazione pppoatm. > Posso provare a risolvere il tuo problema solo se puoi fornire delle > informazioni più dettagliate rispetto a "non riesco ad accedere a internet".> Allora, > > 0) apri una shell e diventa utente root> > 1) dovresti vedere il modem attraverso l'interfaccia ethernet, per assicurarci > di questo dai il comando:> > ifconfig> > l'interfaccia (al 99% eth0) dovrebbe avere un indirizzo ip assegnato dal > modem.> > 2) utilizzi il tool nel menù Internet per effettuare la connessione in > pppoatm, dobbiamo trovare il log per capire se la connessione va a buon fine. > Ora come ora non so dove sia il log, ma potrebbe essere qualcosa > tipo /var/log/pppoatm.log oppure lancia "dmesg"> > 3) log o non log, se la connessione è andata dovresti avere un'interfaccia > ppp0, quindi ridai il comando ifconfig e guarda se c'è questa interfaccia> > 4) se c'e' l'interfaccia vuol dire che c'è comunicazione con il provider, > quindi se non vai su internet valutiamo le solite cose:> > 4a) routing:> > route -n (dovrebbe comparire un default route verso internet)> > 4b) dns:> > in /etc/resolv.conf dovrebbero essere stati autoconfigurati i dns del provider> > 4c) firewall:> > a volte il firewall blocca perché configurato male, disattivalo con service > iptables stop> > 4d) prova un ping, es.> > ping www.openmamba.org> > 4e) se sei arrivato fino a questo punto vuol dire che non ho scritto questo > messaggio inutilmente, che mi farai sapere e proseguiamo al prossimo > messaggio. :-)> > > Usando openmamba non installato posso connettermi lo stesso a internet o> > devo per forza installarlo??> > E' uguale, i due sistemi per il momento sono identici, solo che se devi > configurare un pò di cose meglio installare il sistema così non devi rifare > tutto ogni volta che riavvii il computer.> > ciao,> Silvan> > -- > mambaSoft di Silvan Calarco - http://www.mambasoft.it> openmamba GNU/Linux development - http://www.openmamba.org
_________________________________________________________________
Conosci Doretta? Contattala, è ora su Messenger!
http://www.doretta82.it/banner/index.html
-------------- parte successiva --------------
Un allegato HTML è stato rimosso...
URL: http://tao/pipermail/openmamba-users-it/attachments/20071015/f1bad7ff/attachment-0001.html
Maggiori informazioni sulla lista
openmamba-users-it